COMP/CMSDIST/fwlite.spec

### RPM cms fwlite CMSSW_1_5_0_pre5_FWLITE
## IMPORT configurations 
Provides: /bin/zsh
Requires: SCRAMV1
Requires: fwlite-tool-conf
Requires: gcc-wrapper
%define gccwrapperarch  slc4_ia32_gcc345 

# Take source from CMSSW base release:
%define application  %n
# Assuming release name convention for FWLite release based on CMSSW_X_Y_Z is CMSSW_X_Y_Z_FWLITE .
%define cmssw_release %(perl -e '$_="%v"; s/_FWLITE//; print;')
%define cmsswsrc           http://cmsdoc.cern.ch/cms/cpt/Software/download/cms/SOURCES/cms/cmssw/%{cmssw_release}
Source0: %{cmsswsrc}/toolbox.tar.gz
Source1: %{cmsswsrc}/config.tar.gz
Source2: %{cmsswsrc}/src.tar.gz

%define toolconf        ${FWLITE_TOOL_CONF_ROOT}/configurations/tools-STANDALONE.conf
%define prebuildtarget  gindices
%define buildtarget     release-build
%define postbuildtarget doc

# Following dependencies were not detected by ignominy, but required in the BuildFiles:
# boost_program_options boost_regex bz2lib pcre root rootcintex uuid zlib

%define externals "cxxcompiler ccompiler clhep sockets seal boost boost_filesystem rootrflx rootcore rootmath gccxml boost_python elementtree sigcpp hepmc gsl boost_regex boost_program_options boost_program_options boost_regex bz2lib pcre root rootcintex zlib"

%define packages "DataFormats/BTauReco DataFormats/CLHEP DataFormats/CaloRecHit DataFormats/CaloTowers DataFormats/Candidate DataFormats/Common DataFormats/DetId DataFormats/EcalDetId DataFormats/EcalRecHit DataFormats/EgammaCandidates DataFormats/EgammaReco DataFormats/EgammaTrackReco DataFormats/FEDRawData DataFormats/GeometryCommonDetAlgo DataFormats/GeometrySurface DataFormats/GeometryVector DataFormats/GsfTrackReco DataFormats/HcalDetId DataFormats/HcalRecHit DataFormats/HepMCCandidate DataFormats/JetReco DataFormats/L1CaloTrigger DataFormats/L1GlobalCaloTrigger DataFormats/L1GlobalMuonTrigger DataFormats/L1Trigger DataFormats/METReco DataFormats/Math DataFormats/MuonDetId DataFormats/MuonReco DataFormats/ParticleFlowCandidate DataFormats/ParticleFlowReco DataFormats/Provenance DataFormats/RecoCandidate DataFormats/SiPixelCluster DataFormats/SiPixelDetId DataFormats/SiPixelDigi DataFormats/SiStripCluster DataFormats/SiStripCommon DataFormats/SiStripDetId DataFormats/SiStripDigi DataFormats/TrackCandidate DataFormats/TrackReco DataFormats/TrackerRecHit2D DataFormats/TrackingRecHit DataFormats/TrajectorySeed DataFormats/TrajectoryState DataFormats/VertexReco FWCore/FWLite FWCore/MessageLogger FWCore/PluginManager FWCore/RootAutoLibraryLoader FWCore/Utilities SimDataFormats/HepMCProduct"

%prep

# Create a SCRAM project area, but using the already extracted
# sources.  In other words, pick up the files from the project config
# area, but munge all instances of <base url="cvs:*"> into a local
# reference so SCRAM won't try to download stuff from the network.

%setup -T -b 0 -n SCRAMToolBox
%setup -D -T -b 1 -n config
%setup -D -T -b 2 -n src


# Update requirements:

%if "%{buildarch:set}" != "set"
%define buildarch       :
%endif

# NR: Allow to define bootstrap and requirements file names
%define bootstrapfile config/%{application}_bootsrc
%define reqfile config/%{application}_requirements


cd %_builddir

# Create bootstrap file for fwlite:
cp config/bootsrc %bootstrapfile
perl -p -i -e ' 
# s!(<project.*name=)CMSSW(.*version=)CMSSW(.*)!$1%projectname$2%projectname$3!;
 s!(<project.*name=CMSSW.*version=)%cmssw_release(.*)!$1%v$2!;
 s!config/requirements!%{reqfile}!;
 if (s/(<download.*)(module=)CMSSW(.*)(name="src)(">)/#$1$2$3$4$5/) {
   foreach $p (split / /, %{packages}) {
      print "$1$2src/$p$3$4/$p$5\n"
   }
  }
' %bootstrapfile

# Create requirements file:
cp config/requirements %reqfile
perl -p -i -e '
  if (m/(<select name=)(.*)(>)/) {
    foreach $t (split / /, %externals) {
      if ( $t eq lc($2) ) { $matches=1; last; }
    }
    if ( $matches != 1 ) { s/(.*)$/#$1/ }; 
    $matches=0;
  }
' %reqfile

# Create build templates: 
# for file in config/CMSSW_*.tmpl; do cat $file > `echo $file | sed s'/CMSSW/%{projectname}/'`; done

# Switch off building tests: 
perl -p -i -e ' s!(<ClassPath.*test\+test>)!#$1!;' config/BuildFile

# Munging algorithm from scramv1-build.file:
perl -p -i -e '
  # Keep track whether we are in a toolbox area or not
  if ($. == 1) { $intbx = 1; }
  if (/<base/) { $intbx = /SPITOOLS|SCRAMToolBox|scramtoolbox/; }

  # Replace base locations
  s!cvs://.*/(SPITOOLS|SCRAMToolBox|scramtoolbox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
  s!cvs://.*/(CMSSW)\?[^">]+!file:%_builddir/!;
  
  # Replace relative references depending on whether this is in
  # toolbox, or for project itself; configuration is always in
  # toolbox.  In toolbox keep cvs module name but drop the leading
  # SCRAMToolBox if there is one.  In project always replace with
  # rewritten paths.  (FIXME: produce source archive in cvs order?)
  if ($intbx) {
    s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
    s!url="(cvs:\?module=|file:)SCRAMToolBox/(.*)">!url="file:$2">!;
    s!url="(cvs:\?module=|file:)scramtoolbox/(.*)">!url="file:$2">!;
  } else {
    #s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$2" name="$2">!;
    s!<download\s+url="cvs:\?module=LCGAAwrappers/%cvsproj/[^"]+?"\s+name=.+>!!;
    s!url="cvs:\?module="?%cvssrc/([^">]+)"?\s+name="?([^">]+)"?>!url="file:src/$1" name="$2">!;
    s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
  }
 ' %{bootstrapfile} \
   %{reqfile} \
   SCRAMToolBox/CMS/Configuration/CMSconfiguration

# Handle toolbox
pwd 
perl -p -i -e '
    # Replace base locations
    s!cvs://.*/(SPITOOLS|SCRAMToolBox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
    s!cvs://.*/(SPITOOLS|scramtoolbox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
    s!cvs://.*/%cvsdir\?[^">]+!file:%_builddir/!;
    s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
    s!url="(cvs:\?module=|file:)SCRAMToolBox/(.*)">!url="file:$2">!;
    s!url="(cvs:\?module=|file:)scramtoolbox/(.*)">!url="file:$2">!;
' SCRAMToolBox/CMS/Configuration/CMSconfiguration
echo $PERL5LIB
echo rm -rf %i
mkdir -p $(dirname %i)

%{?buildarch:%buildarch}
%define realVersion %(echo %v | cut -f1 -d-)
perl -p -i -e 's|%{realVersion}([^-])|%{v}$1|g' %{bootstrapfile} 
cp -f %toolconf ./tmpconf
%if "%{cmsplatf}" == "%{gccwrapperarch}"
echo "Using gcc wrapper for %cmsplatf"
perl -p -i -e '$gccpath=$ENV{GCC_ROOT};$wrapperpath=$ENV{GCC_WRAPPER_ROOT};s|$gccpath|$wrapperpath|' ./tmpconf
%endif
scramv1 project -d $(dirname %i) -b %{bootstrapfile} -f ./tmpconf;
mv -f ./tmpconf %{i}/config/site

%build
pwd
# Remove cmt stuff that brings unwanted dependencies: 
rm -rf `find %{i}/src -type d -name cmt`
echo `scramv1 arch`
cd %i
echo %toolconf | sed 's|.*tools-||;s|.conf||' > config/site/sitename
cd src

%{?buildarch:%buildarch}

# export SCRAM_NOSYMCHECK=true

if [ $(uname) = Darwin ]; then
  # scramv1 doesn't know the rpath variable on darwin...
  scramv1 b echo_null # ensure lib, bin exist
  eval `scramv1 runtime -sh`
  export DYLD_LIBRARY_PATH=$LD_LIBRARY_PATH
fi

%if "%{?preBuildCommand:set}" == "set"
echo "executing %preBuildCommand"
%preBuildCommand
%endif

%if "%{?buildtarget:set}" != "set"
%define buildtarget %{nil} 
%endif

scramv1 b -r echo_CXX </dev/null
%if "%{?prebuildtarget:set}" == "set"
scramv1 b --verbose -f %{prebuildtarget} </dev/null
%endif
scramv1 b --verbose -f  %{compileOptions} %{makeprocesses} %{buildtarget} </dev/null
%if "%{?additionalBuildTarget0:set}" == "set"
scramv1 b --verbose -f %{additionalBuildTarget0} < /dev/null
%endif
%if "%{?postbuildtarget:set}" == "set"
scramv1 b --verbose -f %{postbuildtarget} </dev/null
%endif

rm -rf %i/tmp
chmod -R 755 %i %i/.SCRAM
(eval `scramv1 run -sh` ; SealPluginRefresh) || true
rm -fR %i/lib/%cmsplatf/.edmplugincache
(eval `scramv1 run -sh` ; EdmPluginRefresh) || true

%install
cd %i
%{?buildarch:%buildarch}
perl -p -i -e "s|^#!.*perl(.*)|#!/usr/bin/env perl$1|" $(grep -r -e "^#!.*perl.*" . | cut -d: -f1)
# need writeable directory for profile stuff
mkdir etc
yes | scramv1 install # FIXME: do by hand?

%post
%initenv
source $RPM_INSTALL_PREFIX/%cmsplatf/lcg/SCRAMV1/V1_0_3-p1/etc/profile.d/init.sh
cd $RPM_INSTALL_PREFIX/%cmsplatf/cms/%n/%v
perl -p -i -e "s|%{instroot}|$RPM_INSTALL_PREFIX|g" $(find config -type f) $(find .SCRAM -type f)
%{?buildarch:%buildarch}
yes | scramv1 install
(rm -rf external/%cmsplatf; ./config/linkexternal.pl --arch %cmsplatf --nolink INCLUDE) || true
(cd $RPM_INSTALL_PREFIX/%pkgrel; eval `scramv1 run -sh`; SealPluginRefresh) || true
Revision:	1.3
Committed:	Mon Jun 11 20:12:00 2007 UTC (17 years, 10 months ago) by ratnik
Branch:	MAIN
Changes since 1.2:	+6 -4 lines
Log Message:	Updated for CMSSW_1_5_0_pre5: - new packages list based on fwlite_application_set.file rev 1.2 - cleanup externals list: removed dependency on xerces-c, f77compiler, and python, the latter will probably come from root rpm anyway. Merged in changes from scramv1-build.file rev. 1.53, used for CMSSW_1_5_0_pre5: - added %{compileOptions} in build command (-k) - run EdmPluginRefresh
#	Content
1	### RPM cms fwlite CMSSW_1_5_0_pre5_FWLITE
2	## IMPORT configurations
3	Provides: /bin/zsh
4	Requires: SCRAMV1
5	Requires: fwlite-tool-conf
6	Requires: gcc-wrapper
7	%define gccwrapperarch slc4_ia32_gcc345
8
9	# Take source from CMSSW base release:
10	%define application %n
11	# Assuming release name convention for FWLite release based on CMSSW_X_Y_Z is CMSSW_X_Y_Z_FWLITE .
12	%define cmssw_release %(perl -e '$_="%v"; s/_FWLITE//; print;')
13	%define cmsswsrc http://cmsdoc.cern.ch/cms/cpt/Software/download/cms/SOURCES/cms/cmssw/%{cmssw_release}
14	Source0: %{cmsswsrc}/toolbox.tar.gz
15	Source1: %{cmsswsrc}/config.tar.gz
16	Source2: %{cmsswsrc}/src.tar.gz
17
18	%define toolconf ${FWLITE_TOOL_CONF_ROOT}/configurations/tools-STANDALONE.conf
19	%define prebuildtarget gindices
20	%define buildtarget release-build
21	%define postbuildtarget doc
22
23	# Following dependencies were not detected by ignominy, but required in the BuildFiles:
24	# boost_program_options boost_regex bz2lib pcre root rootcintex uuid zlib
25
26	%define externals "cxxcompiler ccompiler clhep sockets seal boost boost_filesystem rootrflx rootcore rootmath gccxml boost_python elementtree sigcpp hepmc gsl boost_regex boost_program_options boost_program_options boost_regex bz2lib pcre root rootcintex zlib"
27
28	%define packages "DataFormats/BTauReco DataFormats/CLHEP DataFormats/CaloRecHit DataFormats/CaloTowers DataFormats/Candidate DataFormats/Common DataFormats/DetId DataFormats/EcalDetId DataFormats/EcalRecHit DataFormats/EgammaCandidates DataFormats/EgammaReco DataFormats/EgammaTrackReco DataFormats/FEDRawData DataFormats/GeometryCommonDetAlgo DataFormats/GeometrySurface DataFormats/GeometryVector DataFormats/GsfTrackReco DataFormats/HcalDetId DataFormats/HcalRecHit DataFormats/HepMCCandidate DataFormats/JetReco DataFormats/L1CaloTrigger DataFormats/L1GlobalCaloTrigger DataFormats/L1GlobalMuonTrigger DataFormats/L1Trigger DataFormats/METReco DataFormats/Math DataFormats/MuonDetId DataFormats/MuonReco DataFormats/ParticleFlowCandidate DataFormats/ParticleFlowReco DataFormats/Provenance DataFormats/RecoCandidate DataFormats/SiPixelCluster DataFormats/SiPixelDetId DataFormats/SiPixelDigi DataFormats/SiStripCluster DataFormats/SiStripCommon DataFormats/SiStripDetId DataFormats/SiStripDigi DataFormats/TrackCandidate DataFormats/TrackReco DataFormats/TrackerRecHit2D DataFormats/TrackingRecHit DataFormats/TrajectorySeed DataFormats/TrajectoryState DataFormats/VertexReco FWCore/FWLite FWCore/MessageLogger FWCore/PluginManager FWCore/RootAutoLibraryLoader FWCore/Utilities SimDataFormats/HepMCProduct"
29
30	%prep
31
32	# Create a SCRAM project area, but using the already extracted
33	# sources. In other words, pick up the files from the project config
34	# area, but munge all instances of <base url="cvs:*"> into a local
35	# reference so SCRAM won't try to download stuff from the network.
36
37	%setup -T -b 0 -n SCRAMToolBox
38	%setup -D -T -b 1 -n config
39	%setup -D -T -b 2 -n src
40
41
42	# Update requirements:
43
44	%if "%{buildarch:set}" != "set"
45	%define buildarch :
46	%endif
47
48	# NR: Allow to define bootstrap and requirements file names
49	%define bootstrapfile config/%{application}_bootsrc
50	%define reqfile config/%{application}_requirements
51
52
53	cd %_builddir
54
55	# Create bootstrap file for fwlite:
56	cp config/bootsrc %bootstrapfile
57	perl -p -i -e '
58	# s!(<project.name=)CMSSW(.version=)CMSSW(.*)!$1%projectname$2%projectname$3!;
59	s!(<project.name=CMSSW.version=)%cmssw_release(.*)!$1%v$2!;
60	s!config/requirements!%{reqfile}!;
61	if (s/(<download.)(module=)CMSSW(.)(name="src)(">)/#$1$2$3$4$5/) {
62	foreach $p (split / /, %{packages}) {
63	print "$1$2src/$p$3$4/$p$5\n"
64	}
65	}
66	' %bootstrapfile
67
68	# Create requirements file:
69	cp config/requirements %reqfile
70	perl -p -i -e '
71	if (m/(<select name=)(.*)(>)/) {
72	foreach $t (split / /, %externals) {
73	if ( $t eq lc($2) ) { $matches=1; last; }
74	}
75	if ( $matches != 1 ) { s/(.*)$/#$1/ };
76	$matches=0;
77	}
78	' %reqfile
79
80	# Create build templates:
81	# for file in config/CMSSW_*.tmpl; do cat $file > `echo $file \| sed s'/CMSSW/%{projectname}/'`; done
82
83	# Switch off building tests:
84	perl -p -i -e ' s!(<ClassPath.*test\+test>)!#$1!;' config/BuildFile
85
86	# Munging algorithm from scramv1-build.file:
87	perl -p -i -e '
88	# Keep track whether we are in a toolbox area or not
89	if ($. == 1) { $intbx = 1; }
90	if (/<base/) { $intbx = /SPITOOLS\|SCRAMToolBox\|scramtoolbox/; }
91
92	# Replace base locations
93	s!cvs://.*/(SPITOOLS\|SCRAMToolBox\|scramtoolbox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
94	s!cvs://.*/(CMSSW)\?[^">]+!file:%_builddir/!;
95
96	# Replace relative references depending on whether this is in
97	# toolbox, or for project itself; configuration is always in
98	# toolbox. In toolbox keep cvs module name but drop the leading
99	# SCRAMToolBox if there is one. In project always replace with
100	# rewritten paths. (FIXME: produce source archive in cvs order?)
101	if ($intbx) {
102	s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
103	s!url="(cvs:\?module=\|file:)SCRAMToolBox/(.*)">!url="file:$2">!;
104	s!url="(cvs:\?module=\|file:)scramtoolbox/(.*)">!url="file:$2">!;
105	} else {
106	#s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$2" name="$2">!;
107	s!<download\s+url="cvs:\?module=LCGAAwrappers/%cvsproj/[^"]+?"\s+name=.+>!!;
108	s!url="cvs:\?module="?%cvssrc/([^">]+)"?\s+name="?([^">]+)"?>!url="file:src/$1" name="$2">!;
109	s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
110	}
111	' %{bootstrapfile} \
112	%{reqfile} \
113	SCRAMToolBox/CMS/Configuration/CMSconfiguration
114
115	# Handle toolbox
116	pwd
117	perl -p -i -e '
118	# Replace base locations
119	s!cvs://.*/(SPITOOLS\|SCRAMToolBox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
120	s!cvs://.*/(SPITOOLS\|scramtoolbox)\?[^">]+!file:%_builddir/SCRAMToolBox/!;
121	s!cvs://.*/%cvsdir\?[^">]+!file:%_builddir/!;
122	s!url="cvs:\?module="?([^">]+)"?\s+name="?([^">]+)"?>!url="file:$1" name="$2">!;
123	s!url="(cvs:\?module=\|file:)SCRAMToolBox/(.*)">!url="file:$2">!;
124	s!url="(cvs:\?module=\|file:)scramtoolbox/(.*)">!url="file:$2">!;
125	' SCRAMToolBox/CMS/Configuration/CMSconfiguration
126	echo $PERL5LIB
127	echo rm -rf %i
128	mkdir -p $(dirname %i)
129
130	%{?buildarch:%buildarch}
131	%define realVersion %(echo %v \| cut -f1 -d-)
132	perl -p -i -e 's\|%{realVersion}([^-])\|%{v}$1\|g' %{bootstrapfile}
133	cp -f %toolconf ./tmpconf
134	%if "%{cmsplatf}" == "%{gccwrapperarch}"
135	echo "Using gcc wrapper for %cmsplatf"
136	perl -p -i -e '$gccpath=$ENV{GCC_ROOT};$wrapperpath=$ENV{GCC_WRAPPER_ROOT};s\|$gccpath\|$wrapperpath\|' ./tmpconf
137	%endif
138	scramv1 project -d $(dirname %i) -b %{bootstrapfile} -f ./tmpconf;
139	mv -f ./tmpconf %{i}/config/site
140
141	%build
142	pwd
143	# Remove cmt stuff that brings unwanted dependencies:
144	rm -rf `find %{i}/src -type d -name cmt`
145	echo `scramv1 arch`
146	cd %i
147	echo %toolconf \| sed 's\|.*tools-\|\|;s\|.conf\|\|' > config/site/sitename
148	cd src
149
150	%{?buildarch:%buildarch}
151
152	# export SCRAM_NOSYMCHECK=true
153
154	if [ $(uname) = Darwin ]; then
155	# scramv1 doesn't know the rpath variable on darwin...
156	scramv1 b echo_null # ensure lib, bin exist
157	eval `scramv1 runtime -sh`
158	export DYLD_LIBRARY_PATH=$LD_LIBRARY_PATH
159	fi
160
161	%if "%{?preBuildCommand:set}" == "set"
162	echo "executing %preBuildCommand"
163	%preBuildCommand
164	%endif
165
166	%if "%{?buildtarget:set}" != "set"
167	%define buildtarget %{nil}
168	%endif
169
170	scramv1 b -r echo_CXX </dev/null
171	%if "%{?prebuildtarget:set}" == "set"
172	scramv1 b --verbose -f %{prebuildtarget} </dev/null
173	%endif
174	scramv1 b --verbose -f %{compileOptions} %{makeprocesses} %{buildtarget} </dev/null
175	%if "%{?additionalBuildTarget0:set}" == "set"
176	scramv1 b --verbose -f %{additionalBuildTarget0} < /dev/null
177	%endif
178	%if "%{?postbuildtarget:set}" == "set"
179	scramv1 b --verbose -f %{postbuildtarget} </dev/null
180	%endif
181
182	rm -rf %i/tmp
183	chmod -R 755 %i %i/.SCRAM
184	(eval `scramv1 run -sh` ; SealPluginRefresh) \|\| true
185	rm -fR %i/lib/%cmsplatf/.edmplugincache
186	(eval `scramv1 run -sh` ; EdmPluginRefresh) \|\| true
187
188	%install
189	cd %i
190	%{?buildarch:%buildarch}
191	perl -p -i -e "s\|^#!.perl(.)\|#!/usr/bin/env perl$1\|" $(grep -r -e "^#!.perl." . \| cut -d: -f1)
192	# need writeable directory for profile stuff
193	mkdir etc
194	yes \| scramv1 install # FIXME: do by hand?
195
196	%post
197	%initenv
198	source $RPM_INSTALL_PREFIX/%cmsplatf/lcg/SCRAMV1/V1_0_3-p1/etc/profile.d/init.sh
199	cd $RPM_INSTALL_PREFIX/%cmsplatf/cms/%n/%v
200	perl -p -i -e "s\|%{instroot}\|$RPM_INSTALL_PREFIX\|g" $(find config -type f) $(find .SCRAM -type f)
201	%{?buildarch:%buildarch}
202	yes \| scramv1 install
203	(rm -rf external/%cmsplatf; ./config/linkexternal.pl --arch %cmsplatf --nolink INCLUDE) \|\| true
204	(cd $RPM_INSTALL_PREFIX/%pkgrel; eval `scramv1 run -sh`; SealPluginRefresh) \|\| true