| 20 |
|
# init BlackWhiteListParser |
| 21 |
|
self.blackWhiteListParser = BlackWhiteListParser(cfg_params) |
| 22 |
|
|
| 23 |
< |
try: |
| 24 |
< |
self.MaxTarBallSize = float(self.cfg_params['EDG.maxtarballsize']) |
| 25 |
< |
except KeyError: |
| 26 |
< |
self.MaxTarBallSize = 9.5 |
| 23 |
> |
self.MaxTarBallSize = float(self.cfg_params.get('EDG.maxtarballsize',9.5)) |
| 24 |
|
|
| 25 |
|
# number of jobs requested to be created, limit obj splitting |
| 26 |
|
self.ncjobs = ncjobs |
| 47 |
|
# Try to block creation in case of arch/version mismatch |
| 48 |
|
# |
| 49 |
|
|
| 50 |
< |
a = string.split(self.version, "_") |
| 51 |
< |
|
| 52 |
< |
if int(a[1]) == 1 and (int(a[2]) < 5 and self.executable_arch.find('slc4') == 0): |
| 53 |
< |
msg = "Warning: You are using %s version of CMSSW with %s architecture. \n--> Did you compile your libraries with SLC3? Otherwise you can find some problems running on SLC4 Grid nodes.\n"%(self.version, self.executable_arch) |
| 54 |
< |
common.logger.message(msg) |
| 55 |
< |
if int(a[1]) == 1 and (int(a[2]) >= 5 and self.executable_arch.find('slc3') == 0): |
| 56 |
< |
msg = "Error: CMS does not support %s with %s architecture"%(self.version, self.executable_arch) |
| 57 |
< |
raise CrabException(msg) |
| 58 |
< |
|
| 59 |
< |
common.taskDB.setDict('codeVersion',self.version) |
| 50 |
> |
# a = string.split(self.version, "_") |
| 51 |
> |
# |
| 52 |
> |
# if int(a[1]) == 1 and (int(a[2]) < 5 and self.executable_arch.find('slc4') == 0): |
| 53 |
> |
# msg = "Warning: You are using %s version of CMSSW with %s architecture. \n--> Did you compile your libraries with SLC3? Otherwise you can find some problems running on SLC4 Grid nodes.\n"%(self.version, self.executable_arch) |
| 54 |
> |
# common.logger.message(msg) |
| 55 |
> |
# if int(a[1]) == 1 and (int(a[2]) >= 5 and self.executable_arch.find('slc3') == 0): |
| 56 |
> |
# msg = "Error: CMS does not support %s with %s architecture"%(self.version, self.executable_arch) |
| 57 |
> |
# raise CrabException(msg) |
| 58 |
> |
# |
| 59 |
> |
|
| 60 |
|
self.setParam_('application', self.version) |
| 61 |
|
|
| 62 |
|
### collect Data cards |
| 63 |
|
|
| 64 |
< |
try: |
| 68 |
< |
tmp = cfg_params['CMSSW.datasetpath'] |
| 69 |
< |
log.debug(6, "CMSSW::CMSSW(): datasetPath = "+tmp) |
| 70 |
< |
if string.lower(tmp)=='none': |
| 71 |
< |
self.datasetPath = None |
| 72 |
< |
self.selectNoInput = 1 |
| 73 |
< |
else: |
| 74 |
< |
self.datasetPath = tmp |
| 75 |
< |
self.selectNoInput = 0 |
| 76 |
< |
except KeyError: |
| 64 |
> |
if not cfg_params.has_key('CMSSW.datasetpath'): |
| 65 |
|
msg = "Error: datasetpath not defined " |
| 66 |
|
raise CrabException(msg) |
| 67 |
+ |
tmp = cfg_params['CMSSW.datasetpath'] |
| 68 |
+ |
log.debug(6, "CMSSW::CMSSW(): datasetPath = "+tmp) |
| 69 |
+ |
if string.lower(tmp)=='none': |
| 70 |
+ |
self.datasetPath = None |
| 71 |
+ |
self.selectNoInput = 1 |
| 72 |
+ |
else: |
| 73 |
+ |
self.datasetPath = tmp |
| 74 |
+ |
self.selectNoInput = 0 |
| 75 |
|
|
| 76 |
|
# ML monitoring |
| 77 |
|
# split dataset path style: /PreProdR3Minbias/SIM/GEN-SIM |
| 79 |
|
self.setParam_('dataset', 'None') |
| 80 |
|
self.setParam_('owner', 'None') |
| 81 |
|
else: |
| 82 |
+ |
## SL what is supposed to fail here? |
| 83 |
|
try: |
| 84 |
|
datasetpath_split = self.datasetPath.split("/") |
| 85 |
|
# standard style |
| 90 |
|
self.setParam_('dataset', self.datasetPath) |
| 91 |
|
self.setParam_('owner', self.datasetPath) |
| 92 |
|
|
| 93 |
< |
self.setParam_('taskId', common.taskDB.dict('taskId')) |
| 93 |
> |
self.setParam_('taskId', common._db.queryTask('name')) ## new BL--DS |
| 94 |
|
|
| 95 |
|
self.dataTiers = [] |
| 96 |
|
|
| 97 |
|
## now the application |
| 98 |
< |
try: |
| 99 |
< |
self.executable = cfg_params['CMSSW.executable'] |
| 100 |
< |
self.setParam_('exe', self.executable) |
| 104 |
< |
log.debug(6, "CMSSW::CMSSW(): executable = "+self.executable) |
| 105 |
< |
msg = "Default executable cmsRun overridden. Switch to " + self.executable |
| 106 |
< |
log.debug(3,msg) |
| 107 |
< |
except KeyError: |
| 108 |
< |
self.executable = 'cmsRun' |
| 109 |
< |
self.setParam_('exe', self.executable) |
| 110 |
< |
msg = "User executable not defined. Use cmsRun" |
| 111 |
< |
log.debug(3,msg) |
| 112 |
< |
pass |
| 98 |
> |
self.executable = cfg_params.get('CMSSW.executable','cmsRun') |
| 99 |
> |
self.setParam_('exe', self.executable) |
| 100 |
> |
log.debug(6, "CMSSW::CMSSW(): executable = "+self.executable) |
| 101 |
|
|
| 102 |
< |
try: |
| 115 |
< |
self.pset = cfg_params['CMSSW.pset'] |
| 116 |
< |
log.debug(6, "Cmssw::Cmssw(): PSet file = "+self.pset) |
| 117 |
< |
if self.pset.lower() != 'none' : |
| 118 |
< |
if (not os.path.exists(self.pset)): |
| 119 |
< |
raise CrabException("User defined PSet file "+self.pset+" does not exist") |
| 120 |
< |
else: |
| 121 |
< |
self.pset = None |
| 122 |
< |
except KeyError: |
| 102 |
> |
if not cfg_params.has_key('CMSSW.pset'): |
| 103 |
|
raise CrabException("PSet file missing. Cannot run cmsRun ") |
| 104 |
+ |
self.pset = cfg_params['CMSSW.pset'] |
| 105 |
+ |
log.debug(6, "Cmssw::Cmssw(): PSet file = "+self.pset) |
| 106 |
+ |
if self.pset.lower() != 'none' : |
| 107 |
+ |
if (not os.path.exists(self.pset)): |
| 108 |
+ |
raise CrabException("User defined PSet file "+self.pset+" does not exist") |
| 109 |
+ |
else: |
| 110 |
+ |
self.pset = None |
| 111 |
|
|
| 112 |
|
# output files |
| 113 |
|
## stuff which must be returned always via sandbox |
| 117 |
|
self.output_file_sandbox.append(self.fjrFileName) |
| 118 |
|
|
| 119 |
|
# other output files to be returned via sandbox or copied to SE |
| 120 |
< |
try: |
| 121 |
< |
self.output_file = [] |
| 122 |
< |
tmp = cfg_params['CMSSW.output_file'] |
| 123 |
< |
if tmp != '': |
| 124 |
< |
tmpOutFiles = string.split(cfg_params['CMSSW.output_file'],',') |
| 125 |
< |
log.debug(7, 'cmssw::cmssw(): output files '+str(tmpOutFiles)) |
| 126 |
< |
for tmp in tmpOutFiles: |
| 127 |
< |
tmp=string.strip(tmp) |
| 141 |
< |
self.output_file.append(tmp) |
| 142 |
< |
pass |
| 143 |
< |
else: |
| 144 |
< |
log.message("No output file defined: only stdout/err and the CRAB Framework Job Report will be available\n") |
| 120 |
> |
self.output_file = [] |
| 121 |
> |
tmp = cfg_params.get('CMSSW.output_file',None) |
| 122 |
> |
if tmp : |
| 123 |
> |
tmpOutFiles = string.split(tmp,',') |
| 124 |
> |
log.debug(7, 'cmssw::cmssw(): output files '+str(tmpOutFiles)) |
| 125 |
> |
for tmp in tmpOutFiles: |
| 126 |
> |
tmp=string.strip(tmp) |
| 127 |
> |
self.output_file.append(tmp) |
| 128 |
|
pass |
| 129 |
< |
pass |
| 147 |
< |
except KeyError: |
| 129 |
> |
else: |
| 130 |
|
log.message("No output file defined: only stdout/err and the CRAB Framework Job Report will be available\n") |
| 131 |
< |
pass |
| 131 |
> |
pass |
| 132 |
|
|
| 133 |
|
# script_exe file as additional file in inputSandbox |
| 134 |
< |
try: |
| 135 |
< |
self.scriptExe = cfg_params['USER.script_exe'] |
| 136 |
< |
if self.scriptExe != '': |
| 137 |
< |
if not os.path.isfile(self.scriptExe): |
| 138 |
< |
msg ="ERROR. file "+self.scriptExe+" not found" |
| 139 |
< |
raise CrabException(msg) |
| 158 |
< |
self.additional_inbox_files.append(string.strip(self.scriptExe)) |
| 159 |
< |
except KeyError: |
| 160 |
< |
self.scriptExe = '' |
| 134 |
> |
self.scriptExe = cfg_params.get('USER.script_exe',None) |
| 135 |
> |
if self.scriptExe : |
| 136 |
> |
if not os.path.isfile(self.scriptExe): |
| 137 |
> |
msg ="ERROR. file "+self.scriptExe+" not found" |
| 138 |
> |
raise CrabException(msg) |
| 139 |
> |
self.additional_inbox_files.append(string.strip(self.scriptExe)) |
| 140 |
|
|
| 141 |
|
#CarlosDaniele |
| 142 |
|
if self.datasetPath == None and self.pset == None and self.scriptExe == '' : |
| 144 |
|
raise CrabException(msg) |
| 145 |
|
|
| 146 |
|
## additional input files |
| 147 |
< |
try: |
| 147 |
> |
if cfg_params.has_key('USER.additional_input_files'): |
| 148 |
|
tmpAddFiles = string.split(cfg_params['USER.additional_input_files'],',') |
| 149 |
|
for tmp in tmpAddFiles: |
| 150 |
|
tmp = string.strip(tmp) |
| 168 |
|
pass |
| 169 |
|
pass |
| 170 |
|
common.logger.debug(5,"Additional input files: "+str(self.additional_inbox_files)) |
| 171 |
< |
except KeyError: |
| 193 |
< |
pass |
| 194 |
< |
|
| 195 |
< |
# files per job |
| 196 |
< |
try: |
| 197 |
< |
if (cfg_params['CMSSW.files_per_jobs']): |
| 198 |
< |
raise CrabException("files_per_jobs no longer supported. Quitting.") |
| 199 |
< |
except KeyError: |
| 200 |
< |
pass |
| 171 |
> |
pass |
| 172 |
|
|
| 173 |
|
## Events per job |
| 174 |
< |
try: |
| 174 |
> |
if cfg_params.has_key('CMSSW.events_per_job'): |
| 175 |
|
self.eventsPerJob =int( cfg_params['CMSSW.events_per_job']) |
| 176 |
|
self.selectEventsPerJob = 1 |
| 177 |
< |
except KeyError: |
| 177 |
> |
else: |
| 178 |
|
self.eventsPerJob = -1 |
| 179 |
|
self.selectEventsPerJob = 0 |
| 180 |
|
|
| 181 |
|
## number of jobs |
| 182 |
< |
try: |
| 182 |
> |
if cfg_params.has_key('CMSSW.number_of_jobs'): |
| 183 |
|
self.theNumberOfJobs =int( cfg_params['CMSSW.number_of_jobs']) |
| 184 |
|
self.selectNumberOfJobs = 1 |
| 185 |
< |
except KeyError: |
| 185 |
> |
else: |
| 186 |
|
self.theNumberOfJobs = 0 |
| 187 |
|
self.selectNumberOfJobs = 0 |
| 188 |
|
|
| 189 |
< |
try: |
| 189 |
> |
if cfg_params.has_key('CMSSW.total_number_of_events'): |
| 190 |
|
self.total_number_of_events = int(cfg_params['CMSSW.total_number_of_events']) |
| 191 |
|
self.selectTotalNumberEvents = 1 |
| 192 |
< |
except KeyError: |
| 192 |
> |
else: |
| 193 |
|
self.total_number_of_events = 0 |
| 194 |
|
self.selectTotalNumberEvents = 0 |
| 195 |
|
|
| 202 |
|
msg = 'Must specify number_of_jobs.' |
| 203 |
|
raise CrabException(msg) |
| 204 |
|
|
| 205 |
< |
## source seed for pythia |
| 206 |
< |
try: |
| 207 |
< |
self.sourceSeed = int(cfg_params['CMSSW.pythia_seed']) |
| 208 |
< |
except KeyError: |
| 209 |
< |
self.sourceSeed = None |
| 210 |
< |
common.logger.debug(5,"No seed given") |
| 211 |
< |
|
| 212 |
< |
try: |
| 213 |
< |
self.sourceSeedVtx = int(cfg_params['CMSSW.vtx_seed']) |
| 214 |
< |
except KeyError: |
| 215 |
< |
self.sourceSeedVtx = None |
| 216 |
< |
common.logger.debug(5,"No vertex seed given") |
| 205 |
> |
## New method of dealing with seeds |
| 206 |
> |
self.incrementSeeds = [] |
| 207 |
> |
self.preserveSeeds = [] |
| 208 |
> |
if cfg_params.has_key('CMSSW.preserve_seeds'): |
| 209 |
> |
tmpList = cfg_params['CMSSW.preserve_seeds'].split(',') |
| 210 |
> |
for tmp in tmpList: |
| 211 |
> |
tmp.strip() |
| 212 |
> |
self.preserveSeeds.append(tmp) |
| 213 |
> |
if cfg_params.has_key('CMSSW.increment_seeds'): |
| 214 |
> |
tmpList = cfg_params['CMSSW.increment_seeds'].split(',') |
| 215 |
> |
for tmp in tmpList: |
| 216 |
> |
tmp.strip() |
| 217 |
> |
self.incrementSeeds.append(tmp) |
| 218 |
> |
|
| 219 |
> |
## Old method of dealing with seeds |
| 220 |
> |
## FUTURE: This is for old CMSSW and old CRAB. Can throw exceptions after a couple of CRAB releases and then |
| 221 |
> |
## remove |
| 222 |
> |
self.sourceSeed = cfg_params.get('CMSSW.pythia_seed',None) |
| 223 |
> |
if self.sourceSeed: |
| 224 |
> |
print "pythia_seed is a deprecated parameter. Use preserve_seeds or increment_seeds in the future.\n","Added to increment_seeds." |
| 225 |
> |
self.incrementSeeds.append('sourceSeed') |
| 226 |
> |
|
| 227 |
> |
self.sourceSeedVtx = cfg_params.get('CMSSW.vtx_seed',None) |
| 228 |
> |
if self.sourceSeedVtx: |
| 229 |
> |
print "vtx_seed is a deprecated parameter. Use preserve_seeds or increment_seeds in the future.\n","Added to increment_seeds." |
| 230 |
> |
self.incrementSeeds.append('VtxSmeared') |
| 231 |
> |
|
| 232 |
> |
self.sourceSeedG4 = cfg_params.get('CMSSW.g4_seed',None) |
| 233 |
> |
if self.sourceSeedG4: |
| 234 |
> |
print "g4_seed is a deprecated parameter. Use preserve_seeds or increment_seeds in the future.\n","Added to increment_seeds." |
| 235 |
> |
self.incrementSeeds.append('g4SimHits') |
| 236 |
> |
|
| 237 |
> |
self.sourceSeedMix = cfg_params.get('CMSSW.mix_seed',None) |
| 238 |
> |
if self.sourceSeedMix: |
| 239 |
> |
print "mix_seed is a deprecated parameter. Use preserve_seeds or increment_seeds in the future.\n","Added to increment_seeds." |
| 240 |
> |
self.incrementSeeds.append('mix') |
| 241 |
|
|
| 242 |
< |
try: |
| 248 |
< |
self.sourceSeedG4 = int(cfg_params['CMSSW.g4_seed']) |
| 249 |
< |
except KeyError: |
| 250 |
< |
self.sourceSeedG4 = None |
| 251 |
< |
common.logger.debug(5,"No g4 sim hits seed given") |
| 242 |
> |
self.firstRun = cfg_params.get('CMSSW.first_run',None) |
| 243 |
|
|
| 253 |
– |
try: |
| 254 |
– |
self.sourceSeedMix = int(cfg_params['CMSSW.mix_seed']) |
| 255 |
– |
except KeyError: |
| 256 |
– |
self.sourceSeedMix = None |
| 257 |
– |
common.logger.debug(5,"No mix seed given") |
| 258 |
– |
|
| 259 |
– |
try: |
| 260 |
– |
self.firstRun = int(cfg_params['CMSSW.first_run']) |
| 261 |
– |
except KeyError: |
| 262 |
– |
self.firstRun = None |
| 263 |
– |
common.logger.debug(5,"No first run given") |
| 244 |
|
if self.pset != None: #CarlosDaniele |
| 245 |
|
import PsetManipulator as pp |
| 246 |
|
PsetEdit = pp.PsetManipulator(self.pset) #Daniele Pset |
| 247 |
|
|
| 248 |
|
# Copy/return |
| 249 |
|
|
| 250 |
< |
try: |
| 251 |
< |
self.copy_data = int(cfg_params['USER.copy_data']) |
| 272 |
< |
except KeyError: |
| 273 |
< |
self.copy_data = 0 |
| 274 |
< |
try: |
| 275 |
< |
self.return_data = int(cfg_params['USER.return_data']) |
| 276 |
< |
except KeyError: |
| 277 |
< |
self.return_data = 0 |
| 250 |
> |
self.copy_data = int(cfg_params.get('USER.copy_data',0)) |
| 251 |
> |
self.return_data = int(cfg_params.get('USER.return_data',0)) |
| 252 |
|
|
| 253 |
|
#DBSDLS-start |
| 254 |
|
## Initialize the variables that are extracted from DBS/DLS and needed in other places of the code |
| 276 |
|
# modify Pset |
| 277 |
|
if self.pset != None: #CarlosDaniele |
| 278 |
|
try: |
| 279 |
< |
if (self.datasetPath): # standard job |
| 280 |
< |
# allow to processa a fraction of events in a file |
| 307 |
< |
PsetEdit.inputModule("INPUTFILE") |
| 308 |
< |
PsetEdit.maxEvent(0) |
| 309 |
< |
PsetEdit.skipEvent(0) |
| 310 |
< |
else: # pythia like job |
| 311 |
< |
PsetEdit.maxEvent(self.eventsPerJob) |
| 312 |
< |
if (self.firstRun): |
| 313 |
< |
PsetEdit.pythiaFirstRun(0) #First Run |
| 314 |
< |
if (self.sourceSeed) : |
| 315 |
< |
PsetEdit.pythiaSeed(0) |
| 316 |
< |
if (self.sourceSeedVtx) : |
| 317 |
< |
PsetEdit.vtxSeed(0) |
| 318 |
< |
if (self.sourceSeedG4) : |
| 319 |
< |
PsetEdit.g4Seed(0) |
| 320 |
< |
if (self.sourceSeedMix) : |
| 321 |
< |
PsetEdit.mixSeed(0) |
| 322 |
< |
# add FrameworkJobReport to parameter-set |
| 279 |
> |
# Add FrameworkJobReport to parameter-set, set max events. |
| 280 |
> |
# Reset later for data jobs by writeCFG which does all modifications |
| 281 |
|
PsetEdit.addCrabFJR(self.fjrFileName) |
| 282 |
+ |
PsetEdit.maxEvent(self.eventsPerJob) |
| 283 |
|
PsetEdit.psetWriter(self.configFilename()) |
| 284 |
|
except: |
| 285 |
|
msg='Error while manipuliating ParameterSet: exiting...' |
| 296 |
|
## Contact the DBS |
| 297 |
|
common.logger.message("Contacting Data Discovery Services ...") |
| 298 |
|
try: |
| 340 |
– |
|
| 299 |
|
self.pubdata=DataDiscovery.DataDiscovery(datasetPath, cfg_params) |
| 300 |
|
self.pubdata.fetchDBSInfo() |
| 301 |
|
|
| 338 |
|
|
| 339 |
|
return sites |
| 340 |
|
|
| 341 |
< |
def setArgsList(self, argsList): |
| 342 |
< |
self.argsList = argsList |
| 341 |
> |
# to Be Removed DS -- BL |
| 342 |
> |
# def setArgsList(self, argsList): |
| 343 |
> |
# self.argsList = argsList |
| 344 |
|
|
| 345 |
|
def jobSplittingByBlocks(self, blockSites): |
| 346 |
|
""" |
| 513 |
|
jobSkipEventCount = eventsPerJobRequested - (filesEventCount - jobSkipEventCount - self.eventsbyfile[file]) |
| 514 |
|
# remove all but the last file |
| 515 |
|
filesEventCount = self.eventsbyfile[file] |
| 516 |
< |
parString = "" |
| 558 |
< |
parString += '\\\"' + file + '\\\"\,' |
| 516 |
> |
parString = '\\\"' + file + '\\\"\,' |
| 517 |
|
pass # END if |
| 518 |
|
pass # END while (iterate over files in the block) |
| 519 |
|
pass # END while (iterate over blocks in the dataset) |
| 553 |
|
for range_jobs in noSiteBlock: |
| 554 |
|
msg += str(range_jobs) + virgola |
| 555 |
|
msg += '\n will not be submitted and this block of data can not be analyzed!\n' |
| 556 |
+ |
if self.cfg_params.has_key('EDG.se_white_list'): |
| 557 |
+ |
msg += 'WARNING: SE White List: '+self.cfg_params['EDG.se_white_list']+'\n' |
| 558 |
+ |
msg += '(Hint: By whitelisting you force the job to run at this particular site(s).\n' |
| 559 |
+ |
msg += 'Please check if the dataset is available at this site!)\n' |
| 560 |
+ |
if self.cfg_params.has_key('EDG.ce_white_list'): |
| 561 |
+ |
msg += 'WARNING: CE White List: '+self.cfg_params['EDG.ce_white_list']+'\n' |
| 562 |
+ |
msg += '(Hint: By whitelisting you force the job to run at this particular site(s).\n' |
| 563 |
+ |
msg += 'Please check if the dataset is available at this site!)\n' |
| 564 |
+ |
|
| 565 |
|
common.logger.message(msg) |
| 566 |
|
|
| 567 |
|
self.list_of_args = list_of_lists |
| 615 |
|
if (self.firstRun): |
| 616 |
|
## pythia first run |
| 617 |
|
args.append(str(self.firstRun)+str(i)) |
| 651 |
– |
if (self.sourceSeed): |
| 652 |
– |
args.append(str(self.sourceSeed)+str(i)) |
| 653 |
– |
if (self.sourceSeedVtx): |
| 654 |
– |
## + vtx random seed |
| 655 |
– |
args.append(str(self.sourceSeedVtx)+str(i)) |
| 656 |
– |
if (self.sourceSeedG4): |
| 657 |
– |
## + G4 random seed |
| 658 |
– |
args.append(str(self.sourceSeedG4)+str(i)) |
| 659 |
– |
if (self.sourceSeedMix): |
| 660 |
– |
## + Mix random seed |
| 661 |
– |
args.append(str(self.sourceSeedMix)+str(i)) |
| 662 |
– |
pass |
| 663 |
– |
pass |
| 618 |
|
self.list_of_args.append(args) |
| 665 |
– |
pass |
| 619 |
|
|
| 620 |
|
return |
| 621 |
|
|
| 645 |
|
|
| 646 |
|
def split(self, jobParams): |
| 647 |
|
|
| 695 |
– |
common.jobDB.load() |
| 648 |
|
#### Fabio |
| 649 |
|
njobs = self.total_number_of_jobs |
| 650 |
|
arglist = self.list_of_args |
| 652 |
|
for i in range(njobs): |
| 653 |
|
jobParams.append("") |
| 654 |
|
|
| 655 |
+ |
listID=[] |
| 656 |
+ |
listField=[] |
| 657 |
|
for job in range(njobs): |
| 658 |
|
jobParams[job] = arglist[job] |
| 659 |
< |
# print str(arglist[job]) |
| 660 |
< |
# print jobParams[job] |
| 661 |
< |
common.jobDB.setArguments(job, jobParams[job]) |
| 662 |
< |
common.logger.debug(5,"Job "+str(job)+" Destination: "+str(self.jobDestination[job])) |
| 663 |
< |
common.jobDB.setDestination(job, self.jobDestination[job]) |
| 659 |
> |
listID.append(job+1) |
| 660 |
> |
job_ToSave ={} |
| 661 |
> |
concString = ' ' |
| 662 |
> |
argu='' |
| 663 |
> |
if len(jobParams[job]): |
| 664 |
> |
argu += concString.join(jobParams[job] ) |
| 665 |
> |
job_ToSave['arguments']= str(job+1)+' '+argu## new BL--DS |
| 666 |
> |
job_ToSave['dlsDestination']= self.jobDestination[job]## new BL--DS |
| 667 |
> |
#common._db.updateJob_(job,job_ToSave)## new BL--DS |
| 668 |
> |
listField.append(job_ToSave) |
| 669 |
> |
msg="Job "+str(job)+" Arguments: "+str(job+1)+" "+argu+"\n" \ |
| 670 |
> |
+" Destination: "+str(self.jobDestination[job]) |
| 671 |
> |
common.logger.debug(5,msg) |
| 672 |
> |
#common.logger.debug(5,"Job "+str(job)+" Destination: "+str(self.jobDestination[job])) |
| 673 |
> |
common._db.updateJob_(listID,listField)## new BL--DS |
| 674 |
> |
## Pay Attention Here....DS--BL |
| 675 |
> |
self.argsList = (len(jobParams[1])+1) |
| 676 |
|
|
| 711 |
– |
common.jobDB.save() |
| 677 |
|
return |
| 678 |
< |
|
| 679 |
< |
def getJobTypeArguments(self, nj, sched): |
| 680 |
< |
result = '' |
| 681 |
< |
for i in common.jobDB.arguments(nj): |
| 682 |
< |
result=result+str(i)+" " |
| 683 |
< |
return result |
| 678 |
> |
# |
| 679 |
> |
# def getJobTypeArguments(self, nj, sched): |
| 680 |
> |
# result = '' |
| 681 |
> |
# jobs=[] |
| 682 |
> |
# jobs.append(nj) |
| 683 |
> |
# for i in common._db.queryJob('arguments',jobs):## BL--DS |
| 684 |
> |
# result=result+str(i)+" " |
| 685 |
> |
# return result |
| 686 |
|
|
| 687 |
|
def numberOfJobs(self): |
| 688 |
|
# Fabio |
| 765 |
|
common.logger.debug(5,"data "+root+"/data"+" to be tarred") |
| 766 |
|
tar.add(root+"/data",root[swAreaLen:]+"/data") |
| 767 |
|
|
| 801 |
– |
### Removed ProdAgent Api dependencies ### |
| 802 |
– |
### Add ProdAgent dir to tar |
| 803 |
– |
#paDir = 'ProdAgentApi' |
| 804 |
– |
#pa = os.environ['CRABDIR'] + '/' + 'ProdAgentApi' |
| 805 |
– |
#if os.path.isdir(pa): |
| 806 |
– |
# tar.add(pa,paDir) |
| 768 |
|
|
| 769 |
|
## Add ProdCommon dir to tar |
| 770 |
|
prodcommonDir = 'ProdCommon' |
| 787 |
|
try: |
| 788 |
|
tar = tarfile.open(self.MLtgzfile, "w:gz") |
| 789 |
|
path=os.environ['CRABDIR'] + '/python/' |
| 790 |
< |
for file in ['report.py', 'DashboardAPI.py', 'Logger.py', 'ProcInfo.py', 'apmon.py', 'parseCrabFjr.py']: |
| 790 |
> |
#for file in ['report.py', 'DashboardAPI.py', 'Logger.py', 'ProcInfo.py', 'apmon.py', 'parseCrabFjr.py','writeCfg.py']: |
| 791 |
> |
### FEDE #### |
| 792 |
> |
for file in ['report.py', 'DashboardAPI.py', 'Logger.py', 'ProcInfo.py', 'apmon.py', 'parseCrabFjr.py','writeCfg.py', 'JobReportErrorCode.py']: |
| 793 |
> |
############### |
| 794 |
|
tar.add(path+file,file) |
| 795 |
|
common.logger.debug(5,"Files added to "+self.MLtgzfile+" : "+str(tar.getnames())) |
| 796 |
|
tar.close() |
| 812 |
|
tar.close() |
| 813 |
|
return tarName |
| 814 |
|
|
| 815 |
< |
def wsSetupEnvironment(self, nj): |
| 815 |
> |
def wsSetupEnvironment(self, nj=0): |
| 816 |
|
""" |
| 817 |
|
Returns part of a job script which prepares |
| 818 |
|
the execution environment for the job 'nj'. |
| 819 |
|
""" |
| 820 |
|
# Prepare JobType-independent part |
| 821 |
< |
txt = '' |
| 821 |
> |
txt = '\n#Written by cms_cmssw::wsSetupEnvironment\n' |
| 822 |
|
txt += 'echo ">>> setup environment"\n' |
| 823 |
|
txt += 'if [ $middleware == LCG ]; then \n' |
| 824 |
|
txt += self.wsSetupCMSLCGEnvironment_() |
| 825 |
|
txt += 'elif [ $middleware == OSG ]; then\n' |
| 826 |
|
txt += ' WORKING_DIR=`/bin/mktemp -d $OSG_WN_TMP/cms_XXXXXXXXXXXX`\n' |
| 827 |
|
txt += ' if [ ! $? == 0 ] ;then\n' |
| 828 |
< |
txt += ' echo "SET_CMS_ENV 10016 ==> OSG $WORKING_DIR could not be created on WN `hostname`"\n' |
| 829 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10016"\n' |
| 830 |
< |
txt += ' echo "JobExitCode=10016" | tee -a $RUNTIME_AREA/$repo\n' |
| 831 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 832 |
< |
txt += ' exit 1\n' |
| 828 |
> |
#txt += ' echo "SET_CMS_ENV 10016 ==> OSG $WORKING_DIR could not be created on WN `hostname`"\n' |
| 829 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10016"\n' |
| 830 |
> |
#txt += ' echo "JobExitCode=10016" | tee -a $RUNTIME_AREA/$repo\n' |
| 831 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 832 |
> |
#txt += ' exit 1\n' |
| 833 |
> |
txt += ' echo "ERROR ==> OSG $WORKING_DIR could not be created on WN `hostname`"\n' |
| 834 |
> |
txt += ' job_exit_code=10016\n' |
| 835 |
> |
txt += ' func_exit\n' |
| 836 |
|
txt += ' fi\n' |
| 837 |
|
txt += ' echo ">>> Created working directory: $WORKING_DIR"\n' |
| 838 |
|
txt += '\n' |
| 852 |
|
txt += scram+' project CMSSW '+self.version+'\n' |
| 853 |
|
txt += 'status=$?\n' |
| 854 |
|
txt += 'if [ $status != 0 ] ; then\n' |
| 855 |
< |
txt += ' echo "SET_EXE_ENV 10034 ==>ERROR CMSSW '+self.version+' not found on `hostname`" \n' |
| 856 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10034"\n' |
| 857 |
< |
txt += ' echo "JobExitCode=10034" | tee -a $RUNTIME_AREA/$repo\n' |
| 858 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 859 |
< |
txt += ' if [ $middleware == OSG ]; then \n' |
| 860 |
< |
txt += ' cd $RUNTIME_AREA\n' |
| 861 |
< |
txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 862 |
< |
txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 863 |
< |
txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 864 |
< |
txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 865 |
< |
txt += ' echo "SET_CMS_ENV 10018 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after CMSSW CMSSW_0_6_1 not found on `hostname`"\n' |
| 866 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10018"\n' |
| 867 |
< |
txt += ' echo "JobExitCode=10018" | tee -a $RUNTIME_AREA/$repo\n' |
| 868 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 869 |
< |
txt += ' fi\n' |
| 870 |
< |
txt += ' fi \n' |
| 871 |
< |
txt += ' exit 1 \n' |
| 855 |
> |
#txt += ' echo "SET_EXE_ENV 10034 ==>ERROR CMSSW '+self.version+' not found on `hostname`" \n' |
| 856 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10034"\n' |
| 857 |
> |
#txt += ' echo "JobExitCode=10034" | tee -a $RUNTIME_AREA/$repo\n' |
| 858 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 859 |
> |
txt += ' echo "ERROR ==> CMSSW '+self.version+' not found on `hostname`" \n' |
| 860 |
> |
txt += ' job_exit_code=10034\n' |
| 861 |
> |
#txt += ' if [ $middleware == OSG ]; then \n' |
| 862 |
> |
#txt += ' cd $RUNTIME_AREA\n' |
| 863 |
> |
#txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 864 |
> |
#txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 865 |
> |
#txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 866 |
> |
#txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 867 |
> |
#txt += ' echo "SET_CMS_ENV 10018 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after CMSSW CMSSW_0_6_1 not found on `hostname`"\n' |
| 868 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10018"\n' |
| 869 |
> |
#txt += ' echo "JobExitCode=10018" | tee -a $RUNTIME_AREA/$repo\n' |
| 870 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 871 |
> |
#txt += ' echo "ERROR ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after CMSSW CMSSW_0_6_1 not found on `hostname`"\n' |
| 872 |
> |
#txt += ' job_exit_code=10017\n' |
| 873 |
> |
#txt += ' fi\n' |
| 874 |
> |
#txt += ' fi \n' |
| 875 |
> |
#txt += ' exit 1 \n' |
| 876 |
> |
txt += ' func_exit\n' |
| 877 |
|
txt += 'fi \n' |
| 878 |
|
txt += 'cd '+self.version+'\n' |
| 879 |
|
########## FEDE FOR DBS2 ###################### |
| 886 |
|
txt += "\n" |
| 887 |
|
txt += "## number of arguments (first argument always jobnumber)\n" |
| 888 |
|
txt += "\n" |
| 889 |
< |
txt += "if [ $nargs -lt "+str(len(self.argsList[nj].split()))+" ]\n" |
| 889 |
> |
# txt += "if [ $nargs -lt "+str(len(self.argsList[nj].split()))+" ]\n" |
| 890 |
> |
txt += "if [ $nargs -lt "+str(self.argsList)+" ]\n" |
| 891 |
|
txt += "then\n" |
| 892 |
< |
txt += " echo 'SET_EXE_ENV 1 ==> ERROR Too few arguments' +$nargs+ \n" |
| 893 |
< |
txt += ' echo "JOB_EXIT_STATUS = 50113"\n' |
| 894 |
< |
txt += ' echo "JobExitCode=50113" | tee -a $RUNTIME_AREA/$repo\n' |
| 895 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 896 |
< |
txt += ' if [ $middleware == OSG ]; then \n' |
| 897 |
< |
txt += ' cd $RUNTIME_AREA\n' |
| 898 |
< |
txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 899 |
< |
txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 900 |
< |
txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 901 |
< |
txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 902 |
< |
txt += ' echo "SET_EXE_ENV 50114 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after Too few arguments for CRAB job wrapper"\n' |
| 903 |
< |
txt += ' echo "JOB_EXIT_STATUS = 50114"\n' |
| 904 |
< |
txt += ' echo "JobExitCode=50114" | tee -a $RUNTIME_AREA/$repo\n' |
| 905 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 906 |
< |
txt += ' fi\n' |
| 907 |
< |
txt += ' fi \n' |
| 908 |
< |
txt += " exit 1\n" |
| 892 |
> |
#txt += " echo 'SET_EXE_ENV 1 ==> ERROR Too few arguments' +$nargs+ \n" |
| 893 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 50113"\n' |
| 894 |
> |
#txt += ' echo "JobExitCode=50113" | tee -a $RUNTIME_AREA/$repo\n' |
| 895 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 896 |
> |
txt += " echo 'ERROR ==> Too few arguments' +$nargs+ \n" |
| 897 |
> |
txt += ' job_exit_code=50113\n' |
| 898 |
> |
#txt += ' if [ $middleware == OSG ]; then \n' |
| 899 |
> |
#txt += ' cd $RUNTIME_AREA\n' |
| 900 |
> |
#txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 901 |
> |
#txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 902 |
> |
#txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 903 |
> |
#txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 904 |
> |
#txt += ' echo "SET_EXE_ENV 50114 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after Too few arguments for CRAB job wrapper"\n' |
| 905 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 50114"\n' |
| 906 |
> |
#txt += ' echo "JobExitCode=50114" | tee -a $RUNTIME_AREA/$repo\n' |
| 907 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 908 |
> |
#txt += ' echo "ERROR ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after Too few arguments for CRAB job wrapper"\n' |
| 909 |
> |
#txt += ' job_exit_code=10017\n' |
| 910 |
> |
#txt += ' fi\n' |
| 911 |
> |
#txt += ' fi\n' |
| 912 |
> |
#txt += " exit 1\n" |
| 913 |
> |
txt += " func_exit\n" |
| 914 |
|
txt += "fi\n" |
| 915 |
|
txt += "\n" |
| 916 |
|
|
| 932 |
|
txt += 'PrimaryDataset=null\n' |
| 933 |
|
txt += 'DataTier=null\n' |
| 934 |
|
txt += 'ApplicationFamily=MCDataTier\n' |
| 935 |
< |
if self.pset != None: #CarlosDaniele |
| 935 |
> |
if self.pset != None: |
| 936 |
|
pset = os.path.basename(job.configFilename()) |
| 937 |
|
txt += '\n' |
| 938 |
|
txt += 'cp $RUNTIME_AREA/'+pset+' .\n' |
| 939 |
|
if (self.datasetPath): # standard job |
| 940 |
< |
txt += 'InputFiles=${args[1]}\n' |
| 941 |
< |
txt += 'MaxEvents=${args[2]}\n' |
| 942 |
< |
txt += 'SkipEvents=${args[3]}\n' |
| 940 |
> |
txt += 'InputFiles=${args[1]}; export InputFiles\n' |
| 941 |
> |
txt += 'MaxEvents=${args[2]}; export MaxEvents\n' |
| 942 |
> |
txt += 'SkipEvents=${args[3]}; export SkipEvents\n' |
| 943 |
|
txt += 'echo "Inputfiles:<$InputFiles>"\n' |
| 966 |
– |
txt += 'sed "s#\'INPUTFILE\'#$InputFiles#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 944 |
|
txt += 'echo "MaxEvents:<$MaxEvents>"\n' |
| 968 |
– |
txt += 'sed "s#int32 input = 0#int32 input = $MaxEvents#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 945 |
|
txt += 'echo "SkipEvents:<$SkipEvents>"\n' |
| 970 |
– |
txt += 'sed "s#uint32 skipEvents = 0#uint32 skipEvents = $SkipEvents#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 946 |
|
else: # pythia like job |
| 947 |
< |
seedIndex=1 |
| 947 |
> |
txt += 'PreserveSeeds=' + ','.join(self.preserveSeeds) + '; export PreserveSeeds\n' |
| 948 |
> |
txt += 'IncrementSeeds=' + ','.join(self.incrementSeeds) + '; export IncrementSeeds\n' |
| 949 |
> |
txt += 'echo "PreserveSeeds: <$PreserveSeeds>"\n' |
| 950 |
> |
txt += 'echo "IncrementSeeds:<$IncrementSeeds>"\n' |
| 951 |
|
if (self.firstRun): |
| 952 |
< |
txt += 'FirstRun=${args['+str(seedIndex)+']}\n' |
| 952 |
> |
txt += 'FirstRun=${args[1]}; export FirstRun\n' |
| 953 |
|
txt += 'echo "FirstRun: <$FirstRun>"\n' |
| 976 |
– |
txt += 'sed "s#uint32 firstRun = 0#uint32 firstRun = $FirstRun#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 977 |
– |
seedIndex=seedIndex+1 |
| 954 |
|
|
| 979 |
– |
if (self.sourceSeed): |
| 980 |
– |
txt += 'Seed=${args['+str(seedIndex)+']}\n' |
| 981 |
– |
txt += 'sed "s#uint32 sourceSeed = 0#uint32 sourceSeed = $Seed#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 982 |
– |
seedIndex=seedIndex+1 |
| 983 |
– |
## the following seeds are not always present |
| 984 |
– |
if (self.sourceSeedVtx): |
| 985 |
– |
txt += 'VtxSeed=${args['+str(seedIndex)+']}\n' |
| 986 |
– |
txt += 'echo "VtxSeed: <$VtxSeed>"\n' |
| 987 |
– |
txt += 'sed "s#uint32 VtxSmeared = 0#uint32 VtxSmeared = $VtxSeed#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 988 |
– |
seedIndex += 1 |
| 989 |
– |
if (self.sourceSeedG4): |
| 990 |
– |
txt += 'G4Seed=${args['+str(seedIndex)+']}\n' |
| 991 |
– |
txt += 'echo "G4Seed: <$G4Seed>"\n' |
| 992 |
– |
txt += 'sed "s#uint32 g4SimHits = 0#uint32 g4SimHits = $G4Seed#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 993 |
– |
seedIndex += 1 |
| 994 |
– |
if (self.sourceSeedMix): |
| 995 |
– |
txt += 'mixSeed=${args['+str(seedIndex)+']}\n' |
| 996 |
– |
txt += 'echo "MixSeed: <$mixSeed>"\n' |
| 997 |
– |
txt += 'sed "s#uint32 mix = 0#uint32 mix = $mixSeed#" '+pset+' > tmp && mv -f tmp '+pset+'\n' |
| 998 |
– |
seedIndex += 1 |
| 999 |
– |
pass |
| 1000 |
– |
pass |
| 955 |
|
txt += 'mv -f '+pset+' pset.cfg\n' |
| 956 |
|
|
| 957 |
|
if len(self.additional_inbox_files) > 0: |
| 960 |
|
txt += 'fi\n' |
| 961 |
|
pass |
| 962 |
|
|
| 963 |
< |
if self.pset != None: #CarlosDaniele |
| 963 |
> |
if self.pset != None: |
| 964 |
|
txt += '\n' |
| 965 |
|
txt += 'echo "***** cat pset.cfg *********"\n' |
| 966 |
|
txt += 'cat pset.cfg\n' |
| 967 |
|
txt += 'echo "****** end pset.cfg ********"\n' |
| 968 |
|
txt += '\n' |
| 1015 |
– |
### FEDE FOR DBS OUTPUT PUBLICATION |
| 969 |
|
txt += 'PSETHASH=`EdmConfigHash < pset.cfg` \n' |
| 970 |
|
txt += 'echo "PSETHASH = $PSETHASH" \n' |
| 1018 |
– |
############## |
| 971 |
|
txt += '\n' |
| 972 |
|
return txt |
| 973 |
< |
|
| 974 |
< |
def wsBuildExe(self, nj=0): |
| 973 |
> |
#### FEDE ##### |
| 974 |
> |
def wsUntarSoftware(self, nj=0): |
| 975 |
|
""" |
| 976 |
|
Put in the script the commands to build an executable |
| 977 |
|
or a library. |
| 978 |
|
""" |
| 979 |
|
|
| 980 |
< |
txt = "" |
| 980 |
> |
txt = '\n#Written by cms_cmssw::wsUntarSoftware\n' |
| 981 |
|
|
| 982 |
|
if os.path.isfile(self.tgzNameWithPath): |
| 983 |
|
txt += 'echo ">>> tar xzvf $RUNTIME_AREA/'+os.path.basename(self.tgzNameWithPath)+' :" \n' |
| 984 |
|
txt += 'tar xzvf $RUNTIME_AREA/'+os.path.basename(self.tgzNameWithPath)+'\n' |
| 985 |
|
txt += 'untar_status=$? \n' |
| 986 |
|
txt += 'if [ $untar_status -ne 0 ]; then \n' |
| 987 |
< |
txt += ' echo "SET_EXE 1 ==> ERROR Untarring .tgz file failed"\n' |
| 988 |
< |
txt += ' echo "JOB_EXIT_STATUS = $untar_status" \n' |
| 989 |
< |
txt += ' echo "JobExitCode=$untar_status" | tee -a $RUNTIME_AREA/$repo\n' |
| 1038 |
< |
txt += ' if [ $middleware == OSG ]; then \n' |
| 1039 |
< |
txt += ' cd $RUNTIME_AREA\n' |
| 1040 |
< |
txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 1041 |
< |
txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 1042 |
< |
txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 1043 |
< |
txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 1044 |
< |
txt += ' echo "SET_EXE 50999 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after Untarring .tgz file failed"\n' |
| 1045 |
< |
txt += ' echo "JOB_EXIT_STATUS = 50999"\n' |
| 1046 |
< |
txt += ' echo "JobExitCode=50999" | tee -a $RUNTIME_AREA/$repo\n' |
| 1047 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1048 |
< |
txt += ' fi\n' |
| 1049 |
< |
txt += ' fi \n' |
| 1050 |
< |
txt += ' \n' |
| 1051 |
< |
txt += ' exit 1 \n' |
| 987 |
> |
txt += ' echo "ERROR ==> Untarring .tgz file failed"\n' |
| 988 |
> |
txt += ' job_exit_code=$untar_status\n' |
| 989 |
> |
txt += ' func_exit\n' |
| 990 |
|
txt += 'else \n' |
| 991 |
|
txt += ' echo "Successful untar" \n' |
| 992 |
|
txt += 'fi \n' |
| 993 |
|
txt += '\n' |
| 1056 |
– |
#### Removed ProdAgent API dependencies |
| 994 |
|
txt += 'echo ">>> Include ProdCommon in PYTHONPATH:"\n' |
| 995 |
|
txt += 'if [ -z "$PYTHONPATH" ]; then\n' |
| 996 |
< |
#### FEDE FOR DBS OUTPUT PUBLICATION |
| 1060 |
< |
txt += ' export PYTHONPATH=$SOFTWARE_DIR/ProdCommon\n' |
| 996 |
> |
txt += ' export PYTHONPATH=$RUNTIME_AREA/ProdCommon\n' |
| 997 |
|
txt += 'else\n' |
| 998 |
< |
txt += ' export PYTHONPATH=$SOFTWARE_DIR/ProdCommon:${PYTHONPATH}\n' |
| 998 |
> |
txt += ' export PYTHONPATH=$RUNTIME_AREA/ProdCommon:${PYTHONPATH}\n' |
| 999 |
|
txt += 'echo "PYTHONPATH=$PYTHONPATH"\n' |
| 1064 |
– |
################### |
| 1000 |
|
txt += 'fi\n' |
| 1001 |
|
txt += '\n' |
| 1002 |
|
|
| 1003 |
|
pass |
| 1004 |
|
|
| 1005 |
|
return txt |
| 1006 |
+ |
|
| 1007 |
+ |
def wsBuildExe(self, nj=0): |
| 1008 |
+ |
""" |
| 1009 |
+ |
Put in the script the commands to build an executable |
| 1010 |
+ |
or a library. |
| 1011 |
+ |
""" |
| 1012 |
+ |
|
| 1013 |
+ |
txt = '\n#Written by cms_cmssw::wsBuildExe\n' |
| 1014 |
+ |
txt += 'echo ">>> moving CMSSW software directories in `pwd`" \n' |
| 1015 |
+ |
|
| 1016 |
+ |
txt += 'mv $RUNTIME_AREA/lib . \n' |
| 1017 |
+ |
txt += 'mv $RUNTIME_AREA/module . \n' |
| 1018 |
+ |
txt += 'mv $RUNTIME_AREA/ProdCommon . \n' |
| 1019 |
+ |
|
| 1020 |
+ |
|
| 1021 |
+ |
#if os.path.isfile(self.tgzNameWithPath): |
| 1022 |
+ |
# txt += 'echo ">>> tar xzvf $RUNTIME_AREA/'+os.path.basename(self.tgzNameWithPath)+' :" \n' |
| 1023 |
+ |
# txt += 'tar xzvf $RUNTIME_AREA/'+os.path.basename(self.tgzNameWithPath)+'\n' |
| 1024 |
+ |
# txt += 'untar_status=$? \n' |
| 1025 |
+ |
# txt += 'if [ $untar_status -ne 0 ]; then \n' |
| 1026 |
+ |
# txt += ' echo "ERROR ==> Untarring .tgz file failed"\n' |
| 1027 |
+ |
# txt += ' job_exit_code=$untar_status\n' |
| 1028 |
+ |
# txt += ' func_exit\n' |
| 1029 |
+ |
# txt += 'else \n' |
| 1030 |
+ |
# txt += ' echo "Successful untar" \n' |
| 1031 |
+ |
# txt += 'fi \n' |
| 1032 |
+ |
# txt += '\n' |
| 1033 |
+ |
# txt += 'echo ">>> Include ProdCommon in PYTHONPATH:"\n' |
| 1034 |
+ |
txt += 'if [ -z "$PYTHONPATH" ]; then\n' |
| 1035 |
+ |
txt += ' export PYTHONPATH=$SOFTWARE_DIR/ProdCommon\n' |
| 1036 |
+ |
txt += 'else\n' |
| 1037 |
+ |
txt += ' export PYTHONPATH=$SOFTWARE_DIR/ProdCommon:${PYTHONPATH}\n' |
| 1038 |
+ |
txt += 'echo "PYTHONPATH=$PYTHONPATH"\n' |
| 1039 |
+ |
txt += 'fi\n' |
| 1040 |
+ |
txt += '\n' |
| 1041 |
+ |
|
| 1042 |
+ |
return txt |
| 1043 |
+ |
############################################################################ |
| 1044 |
|
|
| 1045 |
|
def modifySteeringCards(self, nj): |
| 1046 |
|
""" |
| 1055 |
|
return self.executable |
| 1056 |
|
|
| 1057 |
|
def executableArgs(self): |
| 1058 |
+ |
# FUTURE: This function tests the CMSSW version. Can be simplified as we drop support for old versions |
| 1059 |
|
if self.scriptExe:#CarlosDaniele |
| 1060 |
|
return self.scriptExe + " $NJob" |
| 1061 |
|
else: |
| 1088 |
– |
# if >= CMSSW_1_5_X, add -j crab_fjr.xml |
| 1062 |
|
version_array = self.scram.getSWVersion().split('_') |
| 1063 |
|
major = 0 |
| 1064 |
|
minor = 0 |
| 1068 |
|
except: |
| 1069 |
|
msg = "Cannot parse CMSSW version string: " + "_".join(version_array) + " for major and minor release number!" |
| 1070 |
|
raise CrabException(msg) |
| 1071 |
+ |
|
| 1072 |
+ |
ex_args = "" |
| 1073 |
+ |
|
| 1074 |
+ |
# Framework job report |
| 1075 |
|
if major >= 1 and minor >= 5 : |
| 1076 |
< |
return " -j " + self.fjrFileName + " -p pset.cfg" |
| 1076 |
> |
#ex_args += " -j " + self.fjrFileName |
| 1077 |
> |
### FEDE it could be improved!!! #### |
| 1078 |
> |
ex_args += " -j $RUNTIME_AREA/crab_fjr_$NJob.xml" |
| 1079 |
> |
####################################### |
| 1080 |
> |
# Type of cfg file |
| 1081 |
> |
if major >= 2 : |
| 1082 |
> |
ex_args += " -p pset.pycfg" |
| 1083 |
|
else: |
| 1084 |
< |
return " -p pset.cfg" |
| 1084 |
> |
ex_args += " -p pset.cfg" |
| 1085 |
> |
return ex_args |
| 1086 |
|
|
| 1087 |
|
def inputSandbox(self, nj): |
| 1088 |
|
""" |
| 1102 |
|
## additional input files |
| 1103 |
|
tgz = self.additionalInputFileTgz() |
| 1104 |
|
inp_box.append(tgz) |
| 1105 |
+ |
## executable |
| 1106 |
+ |
wrapper = os.path.basename(str(common._db.queryTask('scriptName'))) |
| 1107 |
+ |
inp_box.append(common.work_space.pathForTgz() +'job/'+ wrapper) |
| 1108 |
|
return inp_box |
| 1109 |
|
|
| 1110 |
|
def outputSandbox(self, nj): |
| 1130 |
|
Returns part of a job script which renames the produced files. |
| 1131 |
|
""" |
| 1132 |
|
|
| 1133 |
< |
txt = '\n' |
| 1133 |
> |
txt = '\n#Written by cms_cmssw::wsRenameOutput\n' |
| 1134 |
|
txt += 'echo ">>> current directory (SOFTWARE_DIR): $SOFTWARE_DIR" \n' |
| 1135 |
|
txt += 'echo ">>> current directory content:"\n' |
| 1136 |
|
txt += 'ls \n' |
| 1137 |
|
txt += '\n' |
| 1138 |
|
|
| 1139 |
< |
txt += 'output_exit_status=0\n' |
| 1139 |
> |
#txt += 'output_exit_status=0\n' |
| 1140 |
|
|
| 1141 |
< |
for fileWithSuffix in (self.output_file_sandbox): |
| 1142 |
< |
output_file_num = self.numberFile_(fileWithSuffix, '$NJob') |
| 1143 |
< |
txt += '\n' |
| 1144 |
< |
txt += '# check output file\n' |
| 1145 |
< |
txt += 'if [ -e ./'+fileWithSuffix+' ] ; then\n' |
| 1146 |
< |
txt += ' mv '+fileWithSuffix+' $RUNTIME_AREA/'+output_file_num+'\n' |
| 1147 |
< |
txt += ' ln -s $RUNTIME_AREA/'+output_file_num+' $RUNTIME_AREA/'+fileWithSuffix+'\n' |
| 1148 |
< |
txt += 'else\n' |
| 1149 |
< |
txt += ' exit_status=60302\n' |
| 1150 |
< |
txt += ' echo "ERROR: Output file '+fileWithSuffix+' not found"\n' |
| 1151 |
< |
if common.scheduler.boss_scheduler_name == 'condor_g': |
| 1152 |
< |
txt += ' if [ $middleware == OSG ]; then \n' |
| 1153 |
< |
txt += ' echo "prepare dummy output file"\n' |
| 1154 |
< |
txt += ' echo "Processing of job output failed" > $RUNTIME_AREA/'+output_file_num+'\n' |
| 1155 |
< |
txt += ' fi \n' |
| 1156 |
< |
txt += 'fi\n' |
| 1141 |
> |
### FEDE ####### |
| 1142 |
> |
#for fileWithSuffix in (self.output_file_sandbox): |
| 1143 |
> |
# output_file_num = self.numberFile_(fileWithSuffix, '$NJob') |
| 1144 |
> |
# txt += '\n' |
| 1145 |
> |
# txt += '# check output file\n' |
| 1146 |
> |
# txt += 'if [ -e ./'+fileWithSuffix+' ] ; then\n' |
| 1147 |
> |
# txt += ' mv '+fileWithSuffix+' $RUNTIME_AREA/'+output_file_num+'\n' |
| 1148 |
> |
# txt += ' ln -s $RUNTIME_AREA/'+output_file_num+' $RUNTIME_AREA/'+fileWithSuffix+'\n' |
| 1149 |
> |
# txt += 'else\n' |
| 1150 |
> |
# txt += ' echo "WARNING: Output file '+fileWithSuffix+' not found"\n' |
| 1151 |
> |
# txt += ' job_exit_code=60302\n' |
| 1152 |
> |
# if common.scheduler.name().upper() == 'CONDOR_G': |
| 1153 |
> |
# txt += ' if [ $middleware == OSG ]; then \n' |
| 1154 |
> |
# txt += ' echo "prepare dummy output file"\n' |
| 1155 |
> |
# txt += ' echo "Processing of job output failed" > $RUNTIME_AREA/'+output_file_num+'\n' |
| 1156 |
> |
# txt += ' fi \n' |
| 1157 |
> |
# txt += 'fi\n' |
| 1158 |
|
|
| 1159 |
|
for fileWithSuffix in (self.output_file): |
| 1160 |
|
output_file_num = self.numberFile_(fileWithSuffix, '$NJob') |
| 1168 |
|
txt += ' mv '+fileWithSuffix+' $RUNTIME_AREA/'+output_file_num+'\n' |
| 1169 |
|
txt += ' ln -s $RUNTIME_AREA/'+output_file_num+' $RUNTIME_AREA/'+fileWithSuffix+'\n' |
| 1170 |
|
txt += 'else\n' |
| 1171 |
< |
txt += ' exit_status=60302\n' |
| 1172 |
< |
txt += ' echo "ERROR: Output file '+fileWithSuffix+' not found"\n' |
| 1173 |
< |
txt += ' echo "JOB_EXIT_STATUS = $exit_status"\n' |
| 1174 |
< |
txt += ' output_exit_status=$exit_status\n' |
| 1175 |
< |
if common.scheduler.boss_scheduler_name == 'condor_g': |
| 1171 |
> |
#txt += ' exit_status=60302\n' |
| 1172 |
> |
#txt += ' echo "ERROR: Output file '+fileWithSuffix+' not found"\n' |
| 1173 |
> |
#txt += ' echo "JOB_EXIT_STATUS = $exit_status"\n' |
| 1174 |
> |
#txt += ' output_exit_status=$exit_status\n' |
| 1175 |
> |
txt += ' job_exit_code=60302\n' |
| 1176 |
> |
txt += ' echo "WARNING: Output file '+fileWithSuffix+' not found"\n' |
| 1177 |
> |
if common.scheduler.name().upper() == 'CONDOR_G': |
| 1178 |
|
txt += ' if [ $middleware == OSG ]; then \n' |
| 1179 |
|
txt += ' echo "prepare dummy output file"\n' |
| 1180 |
|
txt += ' echo "Processing of job output failed" > $RUNTIME_AREA/'+output_file_num+'\n' |
| 1229 |
|
'", other.GlueHostApplicationSoftwareRunTimeEnvironment)' |
| 1230 |
|
|
| 1231 |
|
req = req + ' && (other.GlueHostNetworkAdapterOutboundIP)' |
| 1232 |
+ |
if common.scheduler.name() == "glitecoll": |
| 1233 |
+ |
req += ' && other.GlueCEStateStatus == "Production" ' |
| 1234 |
|
|
| 1235 |
|
return req |
| 1236 |
|
|
| 1243 |
|
Returns part of a job script which is prepares |
| 1244 |
|
the execution environment and which is common for all CMS jobs. |
| 1245 |
|
""" |
| 1246 |
< |
txt = ' echo ">>> setup CMS OSG environment:"\n' |
| 1246 |
> |
txt = '\n#Written by cms_cmssw::wsSetupCMSOSGEnvironment_\n' |
| 1247 |
> |
txt += ' echo ">>> setup CMS OSG environment:"\n' |
| 1248 |
|
txt += ' echo "set SCRAM ARCH to ' + self.executable_arch + '"\n' |
| 1249 |
|
txt += ' export SCRAM_ARCH='+self.executable_arch+'\n' |
| 1250 |
|
txt += ' echo "SCRAM_ARCH = $SCRAM_ARCH"\n' |
| 1252 |
|
txt += ' # Use $OSG_APP/cmssoft/cms/cmsset_default.sh to setup cms software\n' |
| 1253 |
|
txt += ' source $OSG_APP/cmssoft/cms/cmsset_default.sh '+self.version+'\n' |
| 1254 |
|
txt += ' else\n' |
| 1255 |
< |
txt += ' echo "SET_CMS_ENV 10020 ==> ERROR $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1256 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10020"\n' |
| 1257 |
< |
txt += ' echo "JobExitCode=10020" | tee -a $RUNTIME_AREA/$repo\n' |
| 1258 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1259 |
< |
txt += '\n' |
| 1260 |
< |
txt += ' cd $RUNTIME_AREA\n' |
| 1261 |
< |
txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 1262 |
< |
txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 1263 |
< |
txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 1264 |
< |
txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 1265 |
< |
txt += ' echo "SET_CMS_ENV 10017 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1266 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10017"\n' |
| 1267 |
< |
txt += ' echo "JobExitCode=10017" | tee -a $RUNTIME_AREA/$repo\n' |
| 1268 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1269 |
< |
txt += ' fi\n' |
| 1255 |
> |
#txt += ' echo "SET_CMS_ENV 10020 ==> ERROR $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1256 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10020"\n' |
| 1257 |
> |
#txt += ' echo "JobExitCode=10020" | tee -a $RUNTIME_AREA/$repo\n' |
| 1258 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1259 |
> |
txt += ' echo "ERROR ==> $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1260 |
> |
txt += ' job_exit_code=10020\n' |
| 1261 |
> |
#txt += ' cd $RUNTIME_AREA\n' |
| 1262 |
> |
#txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 1263 |
> |
#txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 1264 |
> |
#txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 1265 |
> |
#txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 1266 |
> |
#txt += ' echo "SET_CMS_ENV 10017 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1267 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10017"\n' |
| 1268 |
> |
#txt += ' echo "JobExitCode=10017" | tee -a $RUNTIME_AREA/$repo\n' |
| 1269 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1270 |
> |
#txt += ' echo "ERROR ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after $OSG_APP/cmssoft/cms/cmsset_default.sh file not found"\n' |
| 1271 |
> |
#txt += ' job_exit_code=10017\n' |
| 1272 |
> |
#txt += ' fi\n' |
| 1273 |
|
txt += '\n' |
| 1274 |
< |
txt += ' exit 1\n' |
| 1274 |
> |
#txt += ' exit 1\n' |
| 1275 |
> |
txt += ' func_exit\n' |
| 1276 |
|
txt += ' fi\n' |
| 1277 |
|
txt += '\n' |
| 1278 |
< |
txt += ' echo "SET_CMS_ENV 0 ==> setup cms environment ok"\n' |
| 1278 |
> |
txt += ' echo "==> setup cms environment ok"\n' |
| 1279 |
|
txt += ' echo "SCRAM_ARCH = $SCRAM_ARCH"\n' |
| 1280 |
|
|
| 1281 |
|
return txt |
| 1286 |
|
Returns part of a job script which is prepares |
| 1287 |
|
the execution environment and which is common for all CMS jobs. |
| 1288 |
|
""" |
| 1289 |
< |
txt = ' echo ">>> setup CMS LCG environment:"\n' |
| 1289 |
> |
txt = '\n#Written by cms_cmssw::wsSetupCMSLCGEnvironment_\n' |
| 1290 |
> |
txt += ' echo ">>> setup CMS LCG environment:"\n' |
| 1291 |
|
txt += ' echo "set SCRAM ARCH and BUILD_ARCH to ' + self.executable_arch + ' ###"\n' |
| 1292 |
|
txt += ' export SCRAM_ARCH='+self.executable_arch+'\n' |
| 1293 |
|
txt += ' export BUILD_ARCH='+self.executable_arch+'\n' |
| 1294 |
|
txt += ' if [ ! $VO_CMS_SW_DIR ] ;then\n' |
| 1295 |
< |
txt += ' echo "SET_CMS_ENV 10031 ==> ERROR CMS software dir not found on WN `hostname`"\n' |
| 1296 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10031" \n' |
| 1297 |
< |
txt += ' echo "JobExitCode=10031" | tee -a $RUNTIME_AREA/$repo\n' |
| 1298 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1299 |
< |
txt += ' exit 1\n' |
| 1295 |
> |
#txt += ' echo "SET_CMS_ENV 10031 ==> ERROR CMS software dir not found on WN `hostname`"\n' |
| 1296 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10031" \n' |
| 1297 |
> |
#txt += ' echo "JobExitCode=10031" | tee -a $RUNTIME_AREA/$repo\n' |
| 1298 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1299 |
> |
#txt += ' exit 1\n' |
| 1300 |
> |
txt += ' echo "ERROR ==> CMS software dir not found on WN `hostname`"\n' |
| 1301 |
> |
txt += ' job_exit_code=10031\n' |
| 1302 |
> |
txt += ' func_exit\n' |
| 1303 |
|
txt += ' else\n' |
| 1304 |
|
txt += ' echo "Sourcing environment... "\n' |
| 1305 |
|
txt += ' if [ ! -s $VO_CMS_SW_DIR/cmsset_default.sh ] ;then\n' |
| 1306 |
< |
txt += ' echo "SET_CMS_ENV 10020 ==> ERROR cmsset_default.sh file not found into dir $VO_CMS_SW_DIR"\n' |
| 1307 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10020"\n' |
| 1308 |
< |
txt += ' echo "JobExitCode=10020" | tee -a $RUNTIME_AREA/$repo\n' |
| 1309 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1310 |
< |
txt += ' exit 1\n' |
| 1306 |
> |
#txt += ' echo "SET_CMS_ENV 10020 ==> ERROR cmsset_default.sh file not found into dir $VO_CMS_SW_DIR"\n' |
| 1307 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10020"\n' |
| 1308 |
> |
#txt += ' echo "JobExitCode=10020" | tee -a $RUNTIME_AREA/$repo\n' |
| 1309 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1310 |
> |
#txt += ' exit 1\n' |
| 1311 |
> |
txt += ' echo "ERROR ==> cmsset_default.sh file not found into dir $VO_CMS_SW_DIR"\n' |
| 1312 |
> |
txt += ' job_exit_code=10020\n' |
| 1313 |
> |
txt += ' func_exit\n' |
| 1314 |
|
txt += ' fi\n' |
| 1315 |
|
txt += ' echo "sourcing $VO_CMS_SW_DIR/cmsset_default.sh"\n' |
| 1316 |
|
txt += ' source $VO_CMS_SW_DIR/cmsset_default.sh\n' |
| 1317 |
|
txt += ' result=$?\n' |
| 1318 |
|
txt += ' if [ $result -ne 0 ]; then\n' |
| 1319 |
< |
txt += ' echo "SET_CMS_ENV 10032 ==> ERROR problem sourcing $VO_CMS_SW_DIR/cmsset_default.sh"\n' |
| 1320 |
< |
txt += ' echo "JOB_EXIT_STATUS = 10032"\n' |
| 1321 |
< |
txt += ' echo "JobExitCode=10032" | tee -a $RUNTIME_AREA/$repo\n' |
| 1322 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1323 |
< |
txt += ' exit 1\n' |
| 1319 |
> |
#txt += ' echo "SET_CMS_ENV 10032 ==> ERROR problem sourcing $VO_CMS_SW_DIR/cmsset_default.sh"\n' |
| 1320 |
> |
#txt += ' echo "JOB_EXIT_STATUS = 10032"\n' |
| 1321 |
> |
#txt += ' echo "JobExitCode=10032" | tee -a $RUNTIME_AREA/$repo\n' |
| 1322 |
> |
#txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1323 |
> |
#txt += ' exit 1\n' |
| 1324 |
> |
txt += ' echo "ERROR ==> problem sourcing $VO_CMS_SW_DIR/cmsset_default.sh"\n' |
| 1325 |
> |
txt += ' job_exit_code=10032\n' |
| 1326 |
> |
txt += ' func_exit\n' |
| 1327 |
|
txt += ' fi\n' |
| 1328 |
|
txt += ' fi\n' |
| 1329 |
|
txt += ' \n' |
| 1330 |
< |
txt += ' echo "SET_CMS_ENV 0 ==> setup cms environment ok"\n' |
| 1330 |
> |
txt += ' echo "==> setup cms environment ok"\n' |
| 1331 |
|
return txt |
| 1332 |
|
|
| 1333 |
|
### FEDE FOR DBS OUTPUT PUBLICATION |
| 1336 |
|
insert the part of the script that modifies the FrameworkJob Report |
| 1337 |
|
""" |
| 1338 |
|
|
| 1339 |
< |
txt = '' |
| 1339 |
> |
txt = '\n#Written by cms_cmssw::modifyReport\n' |
| 1340 |
|
try: |
| 1341 |
|
publish_data = int(self.cfg_params['USER.publish_data']) |
| 1342 |
|
except KeyError: |
| 1343 |
|
publish_data = 0 |
| 1344 |
|
if (publish_data == 1): |
| 1345 |
< |
txt += 'echo ">>> Modify Job Report:" \n' |
| 1346 |
< |
################ FEDE FOR DBS2 ############################################# |
| 1347 |
< |
#txt += 'chmod a+x $SOFTWARE_DIR/ProdAgentApi/FwkJobRep/ModifyJobReport.py\n' |
| 1348 |
< |
txt += 'chmod a+x $SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py\n' |
| 1349 |
< |
############################################################################# |
| 1350 |
< |
|
| 1351 |
< |
txt += 'if [ -z "$SE" ]; then\n' |
| 1352 |
< |
txt += ' SE="" \n' |
| 1353 |
< |
txt += 'fi \n' |
| 1354 |
< |
txt += 'if [ -z "$SE_PATH" ]; then\n' |
| 1355 |
< |
txt += ' SE_PATH="" \n' |
| 1356 |
< |
txt += 'fi \n' |
| 1350 |
< |
txt += 'echo "SE = $SE"\n' |
| 1351 |
< |
txt += 'echo "SE_PATH = $SE_PATH"\n' |
| 1345 |
> |
|
| 1346 |
> |
txt += 'if [ $copy_exit_status -eq 0 ]; then\n' |
| 1347 |
> |
txt += ' echo ">>> Modify Job Report:" \n' |
| 1348 |
> |
txt += ' chmod a+x $SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py\n' |
| 1349 |
> |
#txt += ' if [ -z "$SE" ]; then\n' |
| 1350 |
> |
#txt += ' SE="" \n' |
| 1351 |
> |
#txt += ' fi \n' |
| 1352 |
> |
#txt += ' if [ -z "$SE_PATH" ]; then\n' |
| 1353 |
> |
#txt += ' SE_PATH="" \n' |
| 1354 |
> |
#txt += ' fi \n' |
| 1355 |
> |
txt += ' echo "SE = $SE"\n' |
| 1356 |
> |
txt += ' echo "SE_PATH = $SE_PATH"\n' |
| 1357 |
|
|
| 1358 |
|
processedDataset = self.cfg_params['USER.publish_data_name'] |
| 1359 |
< |
txt += 'ProcessedDataset='+processedDataset+'\n' |
| 1360 |
< |
#### LFN=/store/user/<user>/processedDataset_PSETHASH |
| 1361 |
< |
txt += 'if [ "$SE_PATH" == "" ]; then\n' |
| 1362 |
< |
#### FEDE: added slash in LFN ############## |
| 1363 |
< |
txt += ' FOR_LFN=/copy_problems/ \n' |
| 1364 |
< |
txt += 'else \n' |
| 1359 |
> |
txt += ' ProcessedDataset='+processedDataset+'\n' |
| 1360 |
> |
#txt += ' if [ "$SE_PATH" == "" ]; then\n' |
| 1361 |
> |
#txt += ' FOR_LFN=/copy_problems/ \n' |
| 1362 |
> |
#txt += ' else \n' |
| 1363 |
> |
#txt += ' tmp=`echo $SE_PATH | awk -F \'store\' \'{print$2}\'` \n' |
| 1364 |
> |
#txt += ' FOR_LFN=/store$tmp \n' |
| 1365 |
> |
#txt += ' fi \n' |
| 1366 |
|
txt += ' tmp=`echo $SE_PATH | awk -F \'store\' \'{print$2}\'` \n' |
| 1361 |
– |
##### FEDE TO BE CHANGED, BECAUSE STORE IS HARDCODED!!!! ######## |
| 1367 |
|
txt += ' FOR_LFN=/store$tmp \n' |
| 1368 |
< |
txt += 'fi \n' |
| 1369 |
< |
txt += 'echo "ProcessedDataset = $ProcessedDataset"\n' |
| 1370 |
< |
txt += 'echo "FOR_LFN = $FOR_LFN" \n' |
| 1371 |
< |
txt += 'echo "CMSSW_VERSION = $CMSSW_VERSION"\n\n' |
| 1372 |
< |
#txt += 'echo "$SOFTWARE_DIR/ProdAgentApi/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH"\n' |
| 1373 |
< |
#txt += '$SOFTWARE_DIR/ProdAgentApi/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH\n' |
| 1374 |
< |
txt += 'echo "$SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH"\n' |
| 1375 |
< |
txt += '$SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH\n' |
| 1376 |
< |
|
| 1377 |
< |
txt += 'modifyReport_result=$?\n' |
| 1378 |
< |
txt += 'echo modifyReport_result = $modifyReport_result\n' |
| 1379 |
< |
txt += 'if [ $modifyReport_result -ne 0 ]; then\n' |
| 1380 |
< |
txt += ' exit_status=1\n' |
| 1381 |
< |
txt += ' echo "ERROR: Problem with ModifyJobReport"\n' |
| 1382 |
< |
txt += 'else\n' |
| 1383 |
< |
txt += ' mv NewFrameworkJobReport.xml crab_fjr_$NJob.xml\n' |
| 1368 |
> |
txt += ' echo "ProcessedDataset = $ProcessedDataset"\n' |
| 1369 |
> |
txt += ' echo "FOR_LFN = $FOR_LFN" \n' |
| 1370 |
> |
txt += ' echo "CMSSW_VERSION = $CMSSW_VERSION"\n\n' |
| 1371 |
> |
#txt += ' echo "$SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH"\n' |
| 1372 |
> |
#txt += ' $SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH\n' |
| 1373 |
> |
### FEDE #### |
| 1374 |
> |
txt += ' echo "$SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py $RUNTIME_AREA/crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH"\n' |
| 1375 |
> |
txt += ' $SOFTWARE_DIR/ProdCommon/ProdCommon/FwkJobRep/ModifyJobReport.py $RUNTIME_AREA/crab_fjr_$NJob.xml $NJob $FOR_LFN $PrimaryDataset $DataTier $ProcessedDataset $ApplicationFamily $executable $CMSSW_VERSION $PSETHASH $SE $SE_PATH\n' |
| 1376 |
> |
#################################### |
| 1377 |
> |
txt += ' modifyReport_result=$?\n' |
| 1378 |
> |
txt += ' if [ $modifyReport_result -ne 0 ]; then\n' |
| 1379 |
> |
txt += ' modifyReport_result=70500\n' |
| 1380 |
> |
txt += ' job_exit_code=$modifyReport_result\n' |
| 1381 |
> |
txt += ' echo "ModifyReportResult=$modifyReport_result" | tee -a $RUNTIME_AREA/$repo\n' |
| 1382 |
> |
txt += ' echo "WARNING: Problem with ModifyJobReport"\n' |
| 1383 |
> |
txt += ' else\n' |
| 1384 |
> |
### FEDE ##### |
| 1385 |
> |
#txt += ' mv NewFrameworkJobReport.xml crab_fjr_$NJob.xml\n' |
| 1386 |
> |
####################### |
| 1387 |
> |
txt += ' mv NewFrameworkJobReport.xml $RUNTIME_AREA/crab_fjr_$NJob.xml\n' |
| 1388 |
> |
txt += ' fi\n' |
| 1389 |
|
txt += 'fi\n' |
| 1380 |
– |
else: |
| 1381 |
– |
txt += 'echo "no data publication required"\n' |
| 1390 |
|
return txt |
| 1391 |
|
|
| 1392 |
|
def cleanEnv(self): |
| 1393 |
< |
txt = '' |
| 1393 |
> |
txt = '\n#Written by cms_cmssw::cleanEnv\n' |
| 1394 |
|
txt += 'if [ $middleware == OSG ]; then\n' |
| 1395 |
|
txt += ' cd $RUNTIME_AREA\n' |
| 1396 |
|
txt += ' echo ">>> current directory (RUNTIME_AREA): $RUNTIME_AREA"\n' |
| 1397 |
|
txt += ' echo ">>> Remove working directory: $WORKING_DIR"\n' |
| 1398 |
|
txt += ' /bin/rm -rf $WORKING_DIR\n' |
| 1399 |
|
txt += ' if [ -d $WORKING_DIR ] ;then\n' |
| 1400 |
< |
txt += ' echo "SET_EXE 60999 ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after cleanup of WN"\n' |
| 1401 |
< |
txt += ' echo "JOB_EXIT_STATUS = 60999"\n' |
| 1402 |
< |
txt += ' echo "JobExitCode=60999" | tee -a $RUNTIME_AREA/$repo\n' |
| 1395 |
< |
txt += ' dumpStatus $RUNTIME_AREA/$repo\n' |
| 1400 |
> |
txt += ' echo "ERROR ==> OSG $WORKING_DIR could not be deleted on WN `hostname` after cleanup of WN"\n' |
| 1401 |
> |
txt += ' job_exit_code=10017\n' |
| 1402 |
> |
txt += ' func_exit\n' |
| 1403 |
|
txt += ' fi\n' |
| 1404 |
|
txt += 'fi\n' |
| 1405 |
|
txt += '\n' |
| 1420 |
|
nd[e]=0 |
| 1421 |
|
return nd.keys() |
| 1422 |
|
|
| 1423 |
< |
|
| 1417 |
< |
def checkOut(self, limit): |
| 1423 |
> |
def outList(self): |
| 1424 |
|
""" |
| 1425 |
|
check the dimension of the output files |
| 1426 |
|
""" |
| 1427 |
< |
txt = 'echo ">>> Starting output sandbox limit check :"\n' |
| 1428 |
< |
allOutFiles = "" |
| 1427 |
> |
txt = '' |
| 1428 |
> |
txt += 'echo ">>> list of expected files on output sandbox"\n' |
| 1429 |
|
listOutFiles = [] |
| 1430 |
< |
txt += 'stdoutFile=`ls *stdout` \n' |
| 1431 |
< |
txt += 'stderrFile=`ls *stderr` \n' |
| 1430 |
> |
stdout = 'CMSSW_$NJob.stdout' |
| 1431 |
> |
stderr = 'CMSSW_$NJob.stderr' |
| 1432 |
|
if (self.return_data == 1): |
| 1433 |
< |
for fileOut in (self.output_file+self.output_file_sandbox): |
| 1434 |
< |
allOutFiles = allOutFiles + " " + self.numberFile_(fileOut, '$NJob') + " $stdoutFile $stderrFile" |
| 1435 |
< |
else: |
| 1436 |
< |
for fileOut in (self.output_file_sandbox): |
| 1437 |
< |
txt += 'echo " '+fileOut+'";\n' |
| 1438 |
< |
allOutFiles = allOutFiles + " " + self.numberFile_(fileOut, '$NJob') + " $stdoutFile $stderrFile" |
| 1439 |
< |
txt += 'echo "OUTPUT files: '+str(allOutFiles)+'";\n' |
| 1440 |
< |
txt += 'ls -gGhrta;\n' |
| 1441 |
< |
txt += 'sum=0;\n' |
| 1442 |
< |
txt += 'for file in '+str(allOutFiles)+' ; do\n' |
| 1443 |
< |
txt += ' if [ -e $file ]; then\n' |
| 1444 |
< |
txt += ' tt=`ls -gGrta $file | awk \'{ print $3 }\'`\n' |
| 1445 |
< |
txt += ' sum=`expr $sum + $tt`\n' |
| 1440 |
< |
txt += ' else\n' |
| 1441 |
< |
txt += ' echo "WARNING: output file $file not found!"\n' |
| 1442 |
< |
txt += ' fi\n' |
| 1443 |
< |
txt += 'done\n' |
| 1444 |
< |
txt += 'echo "Total Output dimension: $sum";\n' |
| 1445 |
< |
txt += 'limit='+str(limit)+';\n' |
| 1446 |
< |
txt += 'echo "OUTPUT FILES LIMIT SET TO: $limit";\n' |
| 1447 |
< |
txt += 'if [ $limit -lt $sum ]; then\n' |
| 1448 |
< |
txt += ' echo "WARNING: output files have to big size - something will be lost;"\n' |
| 1449 |
< |
txt += ' echo " checking the output file sizes..."\n' |
| 1450 |
< |
txt += ' tot=0;\n' |
| 1451 |
< |
txt += ' for filefile in '+str(allOutFiles)+' ; do\n' |
| 1452 |
< |
txt += ' dimFile=`ls -gGrta $filefile | awk \'{ print $3 }\';`\n' |
| 1453 |
< |
txt += ' tot=`expr $tot + $tt`;\n' |
| 1454 |
< |
txt += ' if [ $limit -lt $dimFile ]; then\n' |
| 1455 |
< |
txt += ' echo "deleting file: $filefile";\n' |
| 1456 |
< |
txt += ' rm -f $filefile\n' |
| 1457 |
< |
txt += ' elif [ $limit -lt $tot ]; then\n' |
| 1458 |
< |
txt += ' echo "deleting file: $filefile";\n' |
| 1459 |
< |
txt += ' rm -f $filefile\n' |
| 1460 |
< |
txt += ' else\n' |
| 1461 |
< |
txt += ' echo "saving file: $filefile"\n' |
| 1462 |
< |
txt += ' fi\n' |
| 1463 |
< |
txt += ' done\n' |
| 1464 |
< |
|
| 1465 |
< |
txt += ' ls -agGhrt;\n' |
| 1466 |
< |
txt += ' echo "WARNING: output files are too big in dimension: can not put in the output_sandbox.";\n' |
| 1467 |
< |
txt += ' echo "JOB_EXIT_STATUS = 70000";\n' |
| 1468 |
< |
txt += ' exit_status=70000;\n' |
| 1469 |
< |
txt += 'else' |
| 1470 |
< |
txt += ' echo "Total Output dimension $sum is fine.";\n' |
| 1471 |
< |
txt += 'fi\n' |
| 1472 |
< |
txt += 'echo "Ending output sandbox limit check"\n' |
| 1473 |
< |
return txt |
| 1433 |
> |
for file in (self.output_file+self.output_file_sandbox): |
| 1434 |
> |
listOutFiles.append(self.numberFile_(file, '$NJob')) |
| 1435 |
> |
listOutFiles.append(stdout) |
| 1436 |
> |
listOutFiles.append(stderr) |
| 1437 |
> |
else: |
| 1438 |
> |
for file in (self.output_file_sandbox): |
| 1439 |
> |
listOutFiles.append(self.numberFile_(file, '$NJob')) |
| 1440 |
> |
listOutFiles.append(stdout) |
| 1441 |
> |
listOutFiles.append(stderr) |
| 1442 |
> |
txt += 'echo "output files: '+string.join(listOutFiles,' ')+'"\n' |
| 1443 |
> |
txt += 'filesToCheck="'+string.join(listOutFiles,' ')+'"\n' |
| 1444 |
> |
txt += 'export filesToCheck\n' |
| 1445 |
> |
return txt |
