CRAB/python/full_crab.cfg

[CRAB]
#
#   This section contains the default values for general parameters.
#   They can be set also as a command-line option, i.e.
#
#   key1 = value1
#   [SECTION]
#   key2 = value2
#
#   in this section corresponds to
#
#   crab.py -key1=value1 -key2=SECTION.value2
#
#   in the command line.
#
jobtype = cmssw

### Specify the scheduler to be used. 
### Supported schedulers are : [ edg, glite, condor_g]
scheduler = glitecoll

### To configure CRAB  as client set the name of the server     
### (e.g. server_pi, server_lnl etc etc ) 
### CRAB will submit jobs to the server, which will submit and manage for the users        
#server_name = server_lxb

[CMSSW]

### The data you want to access (to be found on DBS) 
### /primarydataset/datatier/processeddataset
datasetpath=/ttbar_inclusive_TopRex/CMSSW_1_3_1-Spring07-1122/GEN-SIM-DIGI-RECO
### To run CRAB for private events production set datasetPath= None  

### To select a single (list of) run within a single processed dataset define run number (list)  
### selection can be a comma-separated list of run numbers and run number ranges: 1,2,3-4
#runselection=1,2,3-4

### To use a local DBS istance specify the related URL here.   
# dbs_url = http://cmsdoc.cern.ch/cms/test/aprom/DBS/CGIServer/prodquery

### The name of ParameterSet to be used
pset=runSimHitAnalyzer.cfg

### Splitting parameters:
### Total number of events to be accessed: -1 means all
### NOTE: "-1" is not usable if no input
total_number_of_events=-1 

### Number of events to be processed per job
#events_per_job = 1000

### Number of jobs to be created per task   
number_of_jobs = 1

### The output files produced by your application (comma separated list)
output_file = Histos.root

[USER]

### If CRAB.server_mode = 1  
### To set Your e-mail address to be used by the server to notify you 
#eMail = your_email_address 

### To specify the percentage of finished job in a task, corresponding
### to when the notification email will be sent to you by the server default is 100%
#thresholdLevel = 100

### To specify additional files to be put in InputSandBox
### write the full path  if the files are not in the current directory
### (wildcard * are allowed): comma separated list
#additional_input_files = file1, file2, /full/path/file3 

### To use a specific name of UI directory where CRAB will create job to submit (with full path).
### the default directory will be "crab_0_data_time"
#ui_working_dir = /full/path/Name_of_Directory


### OUTPUT file management ###
### To have back the job executable output into UI set return_data= 1
return_data = 1

### If return_data = 1 ###
### To specify the UI directory where to store the CMS executable output
### FULL path is mandatory. Default is  <ui_working_dir>/res will be used.
#outputdir= /full/path/yourOutDir

### If return_data = 1 ###
### To specify the UI directory where to store the stderr, stdout and .BrokerInfo of submitted jobs
### FULL path is mandatory. Default is <ui_working_dir>/res will be used.
#logdir= /full/path/yourLogDir

### To copy the CMS executable output into a SE (i:e castor) set copy_data = 1
copy_data = 0

### if copy_data = 1 ###
### Specify the name of the SE where to copy the CMS executable output.
#storage_element = srm.cern.ch
### Specify the SE directory (or the mountpoint) that has to be writable from all
#storage_path = /castor/cern.ch/user/u/user
### example for LNL SRM
#storage_element = t2-srm-02.lnl.infn.it
#storage_path = /srm/managerv1?SFN=/pnfs/lnl.infn.it/data/cms/store/user

### To specify the version of srm client to use.
#srm_version = 1

### To publish produced output in a local istance of DBS set publish_data = 1
publish_data=0
### Specify the dataset name. The full path will be <primarydataset>/<publish_data_name>/USER 
#publish_data_name = yourDataName
### Specify the URL of DBS istance where CRAB has to publish the output files  
#dbs_url_for_publication = http://cmssrv17.fnal.gov:8989/DBS108LOC1/servlet/DBSServlet


[EDG]

### To change the CMS-broker RB/WMS to be used. The ones available for CMS
### are "CERN" and "CNAF": the configuration
### files needed to change the broker will be automatically downloaded from CRAB web page.
### If the files are already present on the working directory they will be used. 
#rb = CNAF

### CMS myproxy server, to proxy delegation
proxy_server = myproxy.cern.ch 

### To specify  VOMS role and/or group
#role = superman
#group = superheros

### To skip the CRAB check of your proxy 
#dont_check_proxy = 1

### To add other requirements to jdl file, as example the Operating System
#requirements = (other.GlueHostOperatingSystemName == "RedHat")

### To add other parameters to jdl file: semicolon separated list;
#additional_jdl_parameters = AllowZippedISB = false

### To use a specific WMS end point put here the right name:
#wms_service=

### To specify a cpu time and wall_clock_time(=real time) in minutes
#max_cpu_time = 60
#max_wall_clock_time = 60

### To manage White/Black lists: For discovery, please use http://cmslcgco01.cern.ch:8001/
### Use the dns domain (eg fnal, cern, ifae, fzk, cnaf, lnl,....)
### All the storage/computing elements (SE/CE) contained in the strings (comma separated list) 
### will/will not be considered for submission.
### SE Black List:
#se_black_list = infn
### SE White List
#se_white_list = infn

### CE Black List:
#ce_black_list = infn
### CE White List:
#ce_white_list = infn

## fields written into jdl
virtual_organization = cms

## number or retry count
retry_count = 2

[CONDORG]

# Set this to condor to override the batchsystem defined in gridcat.
#batchsystem = condor

# Specify addition condor_g requirments
# use this requirment to run on a cms dedicated hardare
# globus_rsl = (condor_submit=(requirements 'ClusterName == \"CMS\" && (Arch == \"INTEL\" || Arch == \"X86_64\")'))
# use this requirement to run on the new hardware
#globus_rsl = (condor_submit=(requirements 'regexp(\"cms-*\",Machine)'))

Revision:	1.2
Committed:	Thu Mar 20 11:39:10 2008 UTC (17 years, 1 month ago) by spiga
Branch:	MAIN
CVS Tags:	CRAB_2_2_0_pre5, CRAB_2_2_0_pre4, CRAB_2_2_0_pre2
Changes since 1.1:	+6 -13 lines
Log Message:	update to use the server plus doc. for new key: EDG.wms_service
#	User	Rev	Content
1	spiga	1.1	[CRAB]
2			#
3			# This section contains the default values for general parameters.
4			# They can be set also as a command-line option, i.e.
5			#
6			# key1 = value1
7			# [SECTION]
8			# key2 = value2
9			#
10			# in this section corresponds to
11			#
12			# crab.py -key1=value1 -key2=SECTION.value2
13			#
14			# in the command line.
15			#
16			jobtype = cmssw
17
18			### Specify the scheduler to be used.
19			### Supported schedulers are : [ edg, glite, condor_g]
20			scheduler = glitecoll
21
22	spiga	1.2	### To configure CRAB as client set the name of the server
23			### (e.g. server_pi, server_lnl etc etc )
24	spiga	1.1	### CRAB will submit jobs to the server, which will submit and manage for the users
25	spiga	1.2	#server_name = server_lxb
26	spiga	1.1
27			[CMSSW]
28
29			### The data you want to access (to be found on DBS)
30			### /primarydataset/datatier/processeddataset
31			datasetpath=/ttbar_inclusive_TopRex/CMSSW_1_3_1-Spring07-1122/GEN-SIM-DIGI-RECO
32			### To run CRAB for private events production set datasetPath= None
33
34			### To select a single (list of) run within a single processed dataset define run number (list)
35			### selection can be a comma-separated list of run numbers and run number ranges: 1,2,3-4
36			#runselection=1,2,3-4
37
38			### To use a local DBS istance specify the related URL here.
39			# dbs_url = http://cmsdoc.cern.ch/cms/test/aprom/DBS/CGIServer/prodquery
40
41			### The name of ParameterSet to be used
42			pset=runSimHitAnalyzer.cfg
43
44			### Splitting parameters:
45			### Total number of events to be accessed: -1 means all
46			### NOTE: "-1" is not usable if no input
47			total_number_of_events=-1
48
49			### Number of events to be processed per job
50			#events_per_job = 1000
51
52			### Number of jobs to be created per task
53			number_of_jobs = 1
54
55			### The output files produced by your application (comma separated list)
56			output_file = Histos.root
57
58			[USER]
59
60			### If CRAB.server_mode = 1
61			### To set Your e-mail address to be used by the server to notify you
62			#eMail = your_email_address
63
64			### To specify the percentage of finished job in a task, corresponding
65			### to when the notification email will be sent to you by the server default is 100%
66			#thresholdLevel = 100
67
68			### To specify additional files to be put in InputSandBox
69			### write the full path if the files are not in the current directory
70			### (wildcard * are allowed): comma separated list
71			#additional_input_files = file1, file2, /full/path/file3
72
73			### To use a specific name of UI directory where CRAB will create job to submit (with full path).
74			### the default directory will be "crab_0_data_time"
75			#ui_working_dir = /full/path/Name_of_Directory
76
77
78			### OUTPUT file management ###
79			### To have back the job executable output into UI set return_data= 1
80			return_data = 1
81
82			### If return_data = 1 ###
83			### To specify the UI directory where to store the CMS executable output
84			### FULL path is mandatory. Default is <ui_working_dir>/res will be used.
85			#outputdir= /full/path/yourOutDir
86
87			### If return_data = 1 ###
88			### To specify the UI directory where to store the stderr, stdout and .BrokerInfo of submitted jobs
89			### FULL path is mandatory. Default is <ui_working_dir>/res will be used.
90			#logdir= /full/path/yourLogDir
91
92			### To copy the CMS executable output into a SE (i:e castor) set copy_data = 1
93			copy_data = 0
94
95			### if copy_data = 1 ###
96			### Specify the name of the SE where to copy the CMS executable output.
97			#storage_element = srm.cern.ch
98			### Specify the SE directory (or the mountpoint) that has to be writable from all
99			#storage_path = /castor/cern.ch/user/u/user
100			### example for LNL SRM
101			#storage_element = t2-srm-02.lnl.infn.it
102			#storage_path = /srm/managerv1?SFN=/pnfs/lnl.infn.it/data/cms/store/user
103
104			### To specify the version of srm client to use.
105			#srm_version = 1
106
107			### To publish produced output in a local istance of DBS set publish_data = 1
108			publish_data=0
109			### Specify the dataset name. The full path will be <primarydataset>/<publish_data_name>/USER
110			#publish_data_name = yourDataName
111			### Specify the URL of DBS istance where CRAB has to publish the output files
112			#dbs_url_for_publication = http://cmssrv17.fnal.gov:8989/DBS108LOC1/servlet/DBSServlet
113
114
115			[EDG]
116
117			### To change the CMS-broker RB/WMS to be used. The ones available for CMS
118			### are "CERN" and "CNAF": the configuration
119			### files needed to change the broker will be automatically downloaded from CRAB web page.
120			### If the files are already present on the working directory they will be used.
121			#rb = CNAF
122
123			### CMS myproxy server, to proxy delegation
124			proxy_server = myproxy.cern.ch
125
126			### To specify VOMS role and/or group
127			#role = superman
128			#group = superheros
129
130			### To skip the CRAB check of your proxy
131			#dont_check_proxy = 1
132
133			### To add other requirements to jdl file, as example the Operating System
134			#requirements = (other.GlueHostOperatingSystemName == "RedHat")
135
136			### To add other parameters to jdl file: semicolon separated list;
137			#additional_jdl_parameters = AllowZippedISB = false
138
139	spiga	1.2	### To use a specific WMS end point put here the right name:
140			#wms_service=
141
142	spiga	1.1	### To specify a cpu time and wall_clock_time(=real time) in minutes
143			#max_cpu_time = 60
144			#max_wall_clock_time = 60
145
146			### To manage White/Black lists: For discovery, please use http://cmslcgco01.cern.ch:8001/
147			### Use the dns domain (eg fnal, cern, ifae, fzk, cnaf, lnl,....)
148			### All the storage/computing elements (SE/CE) contained in the strings (comma separated list)
149			### will/will not be considered for submission.
150			### SE Black List:
151			#se_black_list = infn
152			### SE White List
153			#se_white_list = infn
154
155			### CE Black List:
156			#ce_black_list = infn
157			### CE White List:
158			#ce_white_list = infn
159
160			## fields written into jdl
161			virtual_organization = cms
162
163			## number or retry count
164			retry_count = 2
165
166			[CONDORG]
167
168			# Set this to condor to override the batchsystem defined in gridcat.
169			#batchsystem = condor
170
171			# Specify addition condor_g requirments
172			# use this requirment to run on a cms dedicated hardare
173			# globus_rsl = (condor_submit=(requirements 'ClusterName == \"CMS\" && (Arch == \"INTEL\" \|\| Arch == \"X86_64\")'))
174			# use this requirement to run on the new hardware
175			#globus_rsl = (condor_submit=(requirements 'regexp(\"cms-*\",Machine)'))
176