UserCode/RateMonShiftTool_dev/AddTableInfo_db.py

import sys
from colors import *
from DatabaseParser import *
from termcolor import colored, cprint
write = sys.stdout.write

NHighExpress=0
NHighStreamA=0

def MoreTableInfo(parser,LumiRange,config,isCol=True):
    print "Monitoring Run %d" % (parser.RunNumber,)
    print "len=",len(LumiRange)
    print "LSRange=", LumiRange
    if len(LumiRange)>0:
        
        [AvInstLumi, AvLiveLumi, AvDeliveredLumi, AvDeadTime,PSCols] = parser.GetAvLumiInfo(LumiRange)
        deadtimebeamactive=parser.GetDeadTimeBeamActive(LumiRange)*100
        ##print "dtba=",deadtimebeamactive
    else:
        print "no lumisections to monitor"
        return
    try:
        LastPSCol = PSCols[-1]
    except:
        LastPSCol = -1
    if isCol:
        
        aRates = parser.GetTriggerRatesByLS("AOutput")
    else:
        if len(parser.GetTriggerRatesByLS("AOutput"))>0:
            aRates = parser.GetTriggerRatesByLS("AOutput")
        else:
            aRates = parser.GetTriggerRatesByLS("AForPPOutput")
            
    
    expressRates = {}
    if isCol:
        expressRates = parser.GetTriggerRatesByLS("ExpressOutput")
    else:
        if len(parser.GetTriggerRatesByLS("ExpressOutput"))>0:
            expressRates=parser.GetTriggerRatesByLS("ExpressOutput")
        else:
            expressRates = parser.GetTriggerRatesByLS("ExpressForCosmicsOutput")
    ExpRate=0
    PeakRate=0
    AvgExpRate=0
    
    ARate=0
    PeakRateA=0
    AvgRateA=0
    
    if len(expressRates.values()) > 20:
        AvgExpRate = sum(expressRates.values())/len(expressRates.values())

    for ls in LumiRange:  ## Find the sum and peak express stream rates
        thisR = expressRates.get(ls,0)
        ExpRate+=thisR
        if thisR>PeakRate:
            PeakRate=thisR

        thisRateA=aRates.get(ls,0)
        ARate+=thisRateA
        if thisRateA>PeakRateA:
            PeakRateA=thisRateA
        
        #ARate+=aRates.get(ls,0)
    ## Print Stream A Rate --moved see below
    ##print "Current Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)

    Warn = False

    ##########################################
    ## Check if the express stream is too high
    ##########################################
    global NHighExpress
    badExpress = ExpRate/len(LumiRange) > config.MaxExpressRate ## avg express stream rate too high?
    baseText = "\nCurrent Express Stream rate is: %0.1f Hz" % (ExpRate/len(LumiRange),) ## text to display
    if badExpress:
        text = colored(baseText,'red',attrs=['reverse'])  ## bad, make the text white on red
        NHighExpress+=1  ## increment the bad express counter
    else:
        text = baseText 
        NHighExpress=0
        
    write(text)
    if badExpress:
        if len(LumiRange)>1:
            if (ExpRate-PeakRate)/(len(LumiRange)-1) <=config.MaxExpressRate: ## one lumisection causes this
                write("  <<  This appears to be due to a 1 lumisection spike, please monitor\n")
            else:
                if NHighExpress > 1:  # big problem, call HLT DOC
                    write(colored("  <<  WARNING: Current Express rate is too high!",'red',attrs=['reverse']) )
                    Warn = True

                #    if AvgExpRate > config.MaxExpressRate:
                #        write( colored("\n\nWARNING: Average Express Stream Rate is too high (%0.1f Hz)  << CALL HLT DOC" % AvgExpRate,'red',attrs=['reverse']) )
                #        Warn = True
        
            
    #########################################
    ##Check if Stream A is too high
    #########################################
    global NHighStreamA
    badStreamA =ARate/len(LumiRange) > config.MaxStreamARate ##Cosmics Express Rate 300 Hz max
    baseTextA= "\nCurrent Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)
    if badStreamA:
        textA=colored(baseTextA,'red',attrs=['reverse'])  ## bad, make the text white on red
        NHighStreamA+=1
    else:
        textA=baseTextA
        NHighStreamA=0

    write(textA)
    if badStreamA:
        if len(LumiRange)>1:
            if (ARate-PeakRateA)/(len(LumiRange)-1) <=config.MaxStreamARate: ## one lumisection causes this
                write("  <<  This appears to be due to a 1 lumisection spike, please monitor\n")
            else:
                if NHighStreamA >1: ##Call HLT doc!
                    write(colored("  <<  WARNING: Current Stream A rate is too high!",'red',attrs=['reverse']) )
                    Warn = True
    write("\n\n")
            
    ######################################
    ##Warning for HLT doc
    ######################################
    if Warn:  ## WARNING
        rows, columns = os.popen('stty size', 'r').read().split()  ## Get the terminal size
        cols = int(columns)
        write( colored("*"*cols+"\n",'red',attrs=['reverse','blink']) )
        line = "*" + " "*int((cols-22)/2)+"CALL HLT DOC (165575)"+" "*int((cols-23)/2)+"*\n"

        write( colored(line,'red',attrs=['reverse','blink']) )
        write( colored("*"*cols+"\n",'red',attrs=['reverse','blink']) )
    
    
    PrescaleColumnString=''
    PSCols = list(set(PSCols))
    for c in PSCols:
        PrescaleColumnString = PrescaleColumnString + str(c) + ","

    if isCol:
        write("The average instantaneous lumi of these lumisections is: ")
        write(str(round(AvInstLumi,1))+"e30\n")
        write("The delivered lumi of these lumi sections is:            ")
        write(str(round(len(LumiRange)*AvDeliveredLumi,1))+"e30"+"\n")
        write("The live (recorded) lumi of these lumi sections is:      ")
        write(str(round(len(LumiRange)*AvLiveLumi,1))+"e30\n\n")
        write("The average deadtime of these lumi sections is:          ")
        if deadtimebeamactive > 5:
            write(bcolors.FAIL)
        elif deadtimebeamactive > 10:
            write(bcolors.WARNING)
        else:
            write(bcolors.OKBLUE)
        write(str(round(deadtimebeamactive,2))+"%")
        write(bcolors.ENDC+"\n")

    print "Used prescale column(s): "+str(PrescaleColumnString)    
    write("Lumisections: ")
    if not isSequential(LumiRange):
        write(str(LumiRange)+"   Lumisections are not sequential (bad LS skipped)\n")
    else:
        write("%d - %d\n" % (min(LumiRange),max(LumiRange),))
    ##print "\nLast Lumisection of the run is:        "+str(parser.GetLastLS())
    write(  "\nLast Lumisection good where DAQ is active is:  "+str(parser.GetLastLS(isCol)) )
    ##write(  "Last Lumisection where DAQ is active is:  "+str(parser.GetLastLS(True)) )
    write("\n\n\n")

    ## if isCol:
##         L1RatePredictions = config.GetExpectedL1Rates(AvInstLumi)
##         if len(L1RatePredictions):
##             print "Expected Level 1 Rates:"
##         for key,val in L1RatePredictions.iteritems():
##             write("Prescale Column "+str(key)+":  "+str(round(val/1000,1))+" kHz")
##             if key == LastPSCol:
##                 write(' << taking data in this column')
##             write('\n')
        
    
def isSequential(t):
    try:
        if len(t)<2:
            return True
    except:
        return True        
    for i,e in enumerate(t[1:]):
        if not abs(e-t[i])==1:
            return False
    return True
Revision:	1.26
Committed:	Sat Apr 14 09:47:09 2012 UTC (13 years ago) by grchrist
Content type:	text/x-python
Branch:	MAIN
CVS Tags:	V00-00-31, V00-00-30, V00-00-29
Changes since 1.25:	+1 -0 lines
Log Message:	100% deadtime problem patched in HLT rates
#	User	Rev	Content
1	amott	1.1	import sys
2			from colors import *
3			from DatabaseParser import *
4	amott	1.12	from termcolor import colored, cprint
5	amott	1.1	write = sys.stdout.write
6
7	amott	1.12	NHighExpress=0
8	grchrist	1.16	NHighStreamA=0
9	amott	1.12
10	amott	1.13	def MoreTableInfo(parser,LumiRange,config,isCol=True):
11	amott	1.14	print "Monitoring Run %d" % (parser.RunNumber,)
12	grchrist	1.25	print "len=",len(LumiRange)
13	grchrist	1.26	print "LSRange=", LumiRange
14	grchrist	1.23	if len(LumiRange)>0:
15	grchrist	1.25
16	grchrist	1.23	[AvInstLumi, AvLiveLumi, AvDeliveredLumi, AvDeadTime,PSCols] = parser.GetAvLumiInfo(LumiRange)
17	grchrist	1.24	deadtimebeamactive=parser.GetDeadTimeBeamActive(LumiRange)*100
18			##print "dtba=",deadtimebeamactive
19	grchrist	1.23	else:
20			print "no lumisections to monitor"
21			return
22	amott	1.13	try:
23			LastPSCol = PSCols[-1]
24			except:
25			LastPSCol = -1
26	grchrist	1.19	if isCol:
27	amott	1.13
28	grchrist	1.19	aRates = parser.GetTriggerRatesByLS("AOutput")
29			else:
30			if len(parser.GetTriggerRatesByLS("AOutput"))>0:
31			aRates = parser.GetTriggerRatesByLS("AOutput")
32			else:
33			aRates = parser.GetTriggerRatesByLS("AForPPOutput")
34
35
36	amott	1.13	expressRates = {}
37			if isCol:
38			expressRates = parser.GetTriggerRatesByLS("ExpressOutput")
39			else:
40	grchrist	1.19	if len(parser.GetTriggerRatesByLS("ExpressOutput"))>0:
41			expressRates=parser.GetTriggerRatesByLS("ExpressOutput")
42			else:
43			expressRates = parser.GetTriggerRatesByLS("ExpressForCosmicsOutput")
44	amott	1.12	ExpRate=0
45			PeakRate=0
46	amott	1.13	AvgExpRate=0
47	grchrist	1.15
48	amott	1.13	ARate=0
49	grchrist	1.15	PeakRateA=0
50			AvgRateA=0
51
52	amott	1.13	if len(expressRates.values()) > 20:
53			AvgExpRate = sum(expressRates.values())/len(expressRates.values())
54
55	amott	1.12	for ls in LumiRange: ## Find the sum and peak express stream rates
56			thisR = expressRates.get(ls,0)
57			ExpRate+=thisR
58			if thisR>PeakRate:
59			PeakRate=thisR
60	grchrist	1.15
61			thisRateA=aRates.get(ls,0)
62			ARate+=thisRateA
63			if thisRateA>PeakRateA:
64			PeakRateA=thisRateA
65
66			#ARate+=aRates.get(ls,0)
67			## Print Stream A Rate --moved see below
68			##print "Current Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)
69	amott	1.12
70	amott	1.13	Warn = False
71	amott	1.12
72	grchrist	1.15	##########################################
73	amott	1.12	## Check if the express stream is too high
74	grchrist	1.15	##########################################
75	amott	1.12	global NHighExpress
76			badExpress = ExpRate/len(LumiRange) > config.MaxExpressRate ## avg express stream rate too high?
77	grchrist	1.16	baseText = "\nCurrent Express Stream rate is: %0.1f Hz" % (ExpRate/len(LumiRange),) ## text to display
78	amott	1.12	if badExpress:
79			text = colored(baseText,'red',attrs=['reverse']) ## bad, make the text white on red
80			NHighExpress+=1 ## increment the bad express counter
81			else:
82			text = baseText
83			NHighExpress=0
84
85			write(text)
86			if badExpress:
87	grchrist	1.21	if len(LumiRange)>1:
88	grchrist	1.20	if (ExpRate-PeakRate)/(len(LumiRange)-1) <=config.MaxExpressRate: ## one lumisection causes this
89			write(" << This appears to be due to a 1 lumisection spike, please monitor\n")
90			else:
91			if NHighExpress > 1: # big problem, call HLT DOC
92			write(colored(" << WARNING: Current Express rate is too high!",'red',attrs=['reverse']) )
93			Warn = True
94	amott	1.13
95			# if AvgExpRate > config.MaxExpressRate:
96			# write( colored("\n\nWARNING: Average Express Stream Rate is too high (%0.1f Hz) << CALL HLT DOC" % AvgExpRate,'red',attrs=['reverse']) )
97			# Warn = True
98	grchrist	1.20
99
100	grchrist	1.15
101
102			#########################################
103			##Check if Stream A is too high
104			#########################################
105			global NHighStreamA
106			badStreamA =ARate/len(LumiRange) > config.MaxStreamARate ##Cosmics Express Rate 300 Hz max
107			baseTextA= "\nCurrent Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)
108			if badStreamA:
109	grchrist	1.16	textA=colored(baseTextA,'red',attrs=['reverse']) ## bad, make the text white on red
110	grchrist	1.15	NHighStreamA+=1
111			else:
112			textA=baseTextA
113			NHighStreamA=0
114
115			write(textA)
116			if badStreamA:
117	grchrist	1.20	if len(LumiRange)>1:
118			if (ARate-PeakRateA)/(len(LumiRange)-1) <=config.MaxStreamARate: ## one lumisection causes this
119			write(" << This appears to be due to a 1 lumisection spike, please monitor\n")
120			else:
121			if NHighStreamA >1: ##Call HLT doc!
122			write(colored(" << WARNING: Current Stream A rate is too high!",'red',attrs=['reverse']) )
123			Warn = True
124	amott	1.13	write("\n\n")
125	grchrist	1.15
126			######################################
127			##Warning for HLT doc
128			######################################
129	amott	1.13	if Warn: ## WARNING
130			rows, columns = os.popen('stty size', 'r').read().split() ## Get the terminal size
131			cols = int(columns)
132			write( colored(""cols+"\n",'red',attrs=['reverse','blink']) )
133			line = "" + " "int((cols-22)/2)+"CALL HLT DOC (165575)"+" "int((cols-23)/2)+"\n"
134	amott	1.12
135	amott	1.13	write( colored(line,'red',attrs=['reverse','blink']) )
136			write( colored(""cols+"\n",'red',attrs=['reverse','blink']) )
137	amott	1.12
138	grchrist	1.17
139	amott	1.1	PrescaleColumnString=''
140	abrinke1	1.10	PSCols = list(set(PSCols))
141	amott	1.1	for c in PSCols:
142			PrescaleColumnString = PrescaleColumnString + str(c) + ","
143
144	amott	1.13	if isCol:
145			write("The average instantaneous lumi of these lumisections is: ")
146			write(str(round(AvInstLumi,1))+"e30\n")
147			write("The delivered lumi of these lumi sections is: ")
148			write(str(round(len(LumiRange)*AvDeliveredLumi,1))+"e30"+"\n")
149			write("The live (recorded) lumi of these lumi sections is: ")
150			write(str(round(len(LumiRange)*AvLiveLumi,1))+"e30\n\n")
151			write("The average deadtime of these lumi sections is: ")
152	grchrist	1.17	if deadtimebeamactive > 5:
153	amott	1.13	write(bcolors.FAIL)
154	grchrist	1.17	elif deadtimebeamactive > 10:
155	amott	1.13	write(bcolors.WARNING)
156			else:
157			write(bcolors.OKBLUE)
158	grchrist	1.17	write(str(round(deadtimebeamactive,2))+"%")
159	amott	1.13	write(bcolors.ENDC+"\n")
160	amott	1.1
161	amott	1.3	print "Used prescale column(s): "+str(PrescaleColumnString)
162	amott	1.4	write("Lumisections: ")
163	amott	1.3	if not isSequential(LumiRange):
164	amott	1.4	write(str(LumiRange)+" Lumisections are not sequential (bad LS skipped)\n")
165			else:
166			write("%d - %d\n" % (min(LumiRange),max(LumiRange),))
167	grchrist	1.23	##print "\nLast Lumisection of the run is: "+str(parser.GetLastLS())
168			write( "\nLast Lumisection good where DAQ is active is: "+str(parser.GetLastLS(isCol)) )
169	grchrist	1.19	##write( "Last Lumisection where DAQ is active is: "+str(parser.GetLastLS(True)) )
170	amott	1.12	write("\n\n\n")
171	amott	1.5
172	grchrist	1.22	## if isCol:
173			## L1RatePredictions = config.GetExpectedL1Rates(AvInstLumi)
174			## if len(L1RatePredictions):
175			## print "Expected Level 1 Rates:"
176			## for key,val in L1RatePredictions.iteritems():
177			## write("Prescale Column "+str(key)+": "+str(round(val/1000,1))+" kHz")
178			## if key == LastPSCol:
179			## write(' << taking data in this column')
180			## write('\n')
181	amott	1.6
182	amott	1.5
183	amott	1.3
184			def isSequential(t):
185			try:
186			if len(t)<2:
187			return True
188			except:
189			return True
190			for i,e in enumerate(t[1:]):
191			if not abs(e-t[i])==1:
192			return False
193			return True