ViewVC Help

View File | Revision Log | Show Annotations | Root Listing

root/cvsroot/UserCode/RateMonShiftTool_dev/AddTableInfo_db.py

Comparing UserCode/RateMonShiftTool_dev/AddTableInfo_db.py (file contents):
Revision 1.2 by amott, Wed Feb 15 09:55:46 2012 UTC vs.
Revision 1.28 by amott, Thu May 10 14:27:53 2012 UTC

#	Line 1 | Line 1
1		import sys
2		from colors import *
3		from DatabaseParser import *
4	+	from termcolor import colored, cprint
5		write = sys.stdout.write
6
7	<	def MoreTableInfo(parser,LumiRange):
8	<	[AvInstLumi, AvLiveLumi, AvDeliveredLumi, AvDeadTime,PSCols] = parser.GetAvLumiInfo(LumiRange)
7	>	NHighExpress=0
8	>	NHighStreamA=0
9
10	<	if AvDeadTime==0:  ## For some reason the dead time in the DB is occasionally broken
11	<	try:
12	<	AvDeadTime = AvLiveLumi/AvDeliveredLumi * 100
13	<	except:
14	<	AvDeadTime = 100
10	>	def MoreTableInfo(parser,LumiRange,config,isCol=True):
11	>	print "Monitoring Run %d" % (parser.RunNumber,)
12	>	print "len=",len(LumiRange)
13	>	print "LSRange=", LumiRange
14	>	if len(LumiRange)>0:
15	>
16	>	[AvInstLumi, AvLiveLumi, AvDeliveredLumi, AvDeadTime,PSCols] = parser.GetAvLumiInfo(LumiRange)
17	>	deadtimebeamactive=parser.GetDeadTimeBeamActive(LumiRange)*100
18	>	##print "dtba=",deadtimebeamactive
19	>	else:
20	>	print "no lumisections to monitor"
21	>	return
22	>	try:
23	>	LastPSCol = PSCols[-1]
24	>	except:
25	>	LastPSCol = -1
26	>	if isCol:
27	>
28	>	aRates = parser.GetTriggerRatesByLS("AOutput")
29	>	bRates = parser.GetTriggerRatesByLS("BOutput")
30	>	if len(bRates) == 0:
31	>	realARates = aRates
32	>	else:
33	>	realARates={}
34	>	for k,v in bRates.iteritems():
35	>	realARates[k]=aRates[k]-bRates[k]
36	>	#realARates = aRates - bRates*20;
37	>	else:
38	>	if len(parser.GetTriggerRatesByLS("AOutput"))>0:
39	>	aRates = parser.GetTriggerRatesByLS("AOutput")
40	>	else:
41	>	aRates = parser.GetTriggerRatesByLS("AForPPOutput")
42	>
43	>
44	>	expressRates = {}
45	>	if isCol:
46	>	expressRates = parser.GetTriggerRatesByLS("ExpressOutput")
47	>	else:
48	>	if len(parser.GetTriggerRatesByLS("ExpressOutput"))>0:
49	>	expressRates=parser.GetTriggerRatesByLS("ExpressOutput")
50	>	else:
51	>	expressRates = parser.GetTriggerRatesByLS("ExpressForCosmicsOutput")
52	>	ExpRate=0
53	>	PeakRate=0
54	>	AvgExpRate=0
55	>
56	>	ARate=0
57	>	PeakRateA=0
58	>	AvgRateA=0
59	>
60	>	realARate=0
61	>	realPeakRateA=0
62	>	realAvgRateA=0
63	>
64	>	if len(expressRates.values()) > 20:
65	>	AvgExpRate = sum(expressRates.values())/len(expressRates.values())
66	>
67	>	for ls in LumiRange:  ## Find the sum and peak express stream rates
68	>	thisR = expressRates.get(ls,0)
69	>	ExpRate+=thisR
70	>	if thisR>PeakRate:
71	>	PeakRate=thisR
72	>
73	>	thisRateA=aRates.get(ls,0)
74	>	ARate+=thisRateA
75	>	if thisRateA>PeakRateA:
76	>	PeakRateA=thisRateA
77	>
78	>	thisRealRateA = aRates.get(ls,0) - bRates.get(ls,0)
79	>	realARate+=thisRealRateA
80	>	if thisRealRateA > realPeakRateA:
81	>	realReakRateA = thisRealRateA
82	>	#ARate+=aRates.get(ls,0)
83	>	## Print Stream A Rate --moved see below
84	>	##print "Current Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)
85	>
86	>	Warn = False
87	>
88	>	##########################################
89	>	## Check if the express stream is too high
90	>	##########################################
91	>	global NHighExpress
92	>	badExpress = ExpRate/len(LumiRange) > config.MaxExpressRate ## avg express stream rate too high?
93	>	baseText = "\nCurrent Express Stream rate is: %0.1f Hz" % (ExpRate/len(LumiRange),) ## text to display
94	>	if badExpress:
95	>	text = colored(baseText,'red',attrs=['reverse'])  ## bad, make the text white on red
96	>	NHighExpress+=1  ## increment the bad express counter
97	>	else:
98	>	text = baseText
99	>	NHighExpress=0
100	>
101	>	write(text)
102	>	if badExpress:
103	>	if len(LumiRange)>1:
104	>	if (ExpRate-PeakRate)/(len(LumiRange)-1) <=config.MaxExpressRate: ## one lumisection causes this
105	>	write("  <<  This appears to be due to a 1 lumisection spike, please monitor\n")
106	>	else:
107	>	if NHighExpress > 1:  # big problem, call HLT DOC
108	>	write(colored("  <<  WARNING: Current Express rate is too high!",'red',attrs=['reverse']) )
109	>	Warn = True
110	>
111	>	#    if AvgExpRate > config.MaxExpressRate:
112	>	#        write( colored("\n\nWARNING: Average Express Stream Rate is too high (%0.1f Hz)  << CALL HLT DOC" % AvgExpRate,'red',attrs=['reverse']) )
113	>	#        Warn = True
114	>
115	>
116	>
117	>
118	>	#########################################
119	>	##Check if Stream A is too high
120	>	#########################################
121	>	global NHighStreamA
122	>	badStreamA =realARate/len(LumiRange) > config.MaxStreamARate ##Cosmics Express Rate 300 Hz max
123	>	baseTextA= "\nCurrent Steam A Rate is: %0.1f Hz" % (ARate/len(LumiRange),)
124	>	baseTextRealA= "\nCurrent PROMPT Steam A Rate is: %0.1f Hz" % (realARate/len(LumiRange),)
125	>	if badStreamA:
126	>	textA=colored(baseTextA,'red',attrs=['reverse'])  ## bad, make the text white on red
127	>	textRealA=colored(baseTextRealA,'red',attrs=['reverse'])  ## bad, make the text white on red
128	>	NHighStreamA+=1
129	>	else:
130	>	textA=baseTextA
131	>	textRealA=baseTextRealA
132	>	NHighStreamA=0
133	>
134	>	write(textA)
135	>	write(textRealA)
136	>	if badStreamA:
137	>	if len(LumiRange)>1:
138	>	if (realARate-realPeakRateA)/(len(LumiRange)-1) <=config.MaxStreamARate: ## one lumisection causes this
139	>	write("  <<  This appears to be due to a 1 lumisection spike, please monitor\n")
140	>	else:
141	>	if NHighStreamA >1: ##Call HLT doc!
142	>	write(colored("  <<  WARNING: Current Stream A rate is too high!",'red',attrs=['reverse']) )
143	>	Warn = True
144	>	write("\n\n")
145	>
146	>	######################################
147	>	##Warning for HLT doc
148	>	######################################
149	>	if Warn:  ## WARNING
150	>	rows, columns = os.popen('stty size', 'r').read().split()  ## Get the terminal size
151	>	cols = int(columns)
152	>	write( colored("*"*cols+"\n",'red',attrs=['reverse','blink']) )
153	>	line = "*" + " "*int((cols-22)/2)+"CALL HLT DOC (165575)"+" "*int((cols-23)/2)+"*\n"
154	>
155	>	write( colored(line,'red',attrs=['reverse','blink']) )
156	>	write( colored("*"*cols+"\n",'red',attrs=['reverse','blink']) )
157	>
158	>
159		PrescaleColumnString=''
160	+	PSCols = list(set(PSCols))
161		for c in PSCols:
162		PrescaleColumnString = PrescaleColumnString + str(c) + ","
163
164	<	write("The average instantaneous lumi of these lumisections is: ")
165	<	write(str(round(AvInstLumi,1))+"e30\n")
166	<	write("The delivered lumi of these lumi sections is:            ")
167	<	write(str(round(1000*AvDeliveredLumi,1))+"e30"+"\n")
168	<	write("The live (recorded) lumi of these lumi sections is:      ")
169	<	write(str(round(1000*AvLiveLumi,1))+"e30\n\n")
170	<	write("The average deadtime of these lumi sections is:          ")
171	<	if AvDeadTime > 5:
172	<	write(bcolors.FAIL)
173	<	elif AvDeadTime > 10:
174	<	write(bcolors.WARNING)
175	<	else:
176	<	write(bcolors.OKBLUE)
177	<	write(str(round(AvDeadTime,1))+"%")
178	<	write(bcolors.ENDC+"\n")
164	>	if isCol:
165	>	write("The average instantaneous lumi of these lumisections is: ")
166	>	write(str(round(AvInstLumi,1))+"e30\n")
167	>	write("The delivered lumi of these lumi sections is:            ")
168	>	write(str(round(len(LumiRange)*AvDeliveredLumi,1))+"e30"+"\n")
169	>	write("The live (recorded) lumi of these lumi sections is:      ")
170	>	write(str(round(len(LumiRange)*AvLiveLumi,1))+"e30\n\n")
171	>	write("The average deadtime of these lumi sections is:          ")
172	>	if deadtimebeamactive > 5:
173	>	write(bcolors.FAIL)
174	>	elif deadtimebeamactive > 10:
175	>	write(bcolors.WARNING)
176	>	else:
177	>	write(bcolors.OKBLUE)
178	>	write(str(round(deadtimebeamactive,2))+"%")
179	>	write(bcolors.ENDC+"\n")
180	>	write("Used prescale column(s): %s  " % (str(PrescaleColumnString),) )
181	>	if LastPSCol in config.ForbiddenCols and isCol:
182	>	write( colored("<< Using column %d! Please check in the documentation that this is the correct column" % (LastPSCol),'red',attrs=['reverse']) )
183	>	write("\nLumisections: ")
184	>	if not isSequential(LumiRange):
185	>	write(str(LumiRange)+"   Lumisections are not sequential (bad LS skipped)\n")
186	>	else:
187	>	write("%d - %d\n" % (min(LumiRange),max(LumiRange),))
188	>	##print "\nLast Lumisection of the run is:        "+str(parser.GetLastLS())
189	>	write(  "\nLast Lumisection good where DAQ is active is:  "+str(parser.GetLastLS(isCol)) )
190	>	##write(  "Last Lumisection where DAQ is active is:  "+str(parser.GetLastLS(True)) )
191	>	write("\n\n\n")
192	>
193	>	## if isCol:
194	>	##         L1RatePredictions = config.GetExpectedL1Rates(AvInstLumi)
195	>	##         if len(L1RatePredictions):
196	>	##             print "Expected Level 1 Rates:"
197	>	##         for key,val in L1RatePredictions.iteritems():
198	>	##             write("Prescale Column "+str(key)+":  "+str(round(val/1000,1))+" kHz")
199	>	##             if key == LastPSCol:
200	>	##                 write(' << taking data in this column')
201	>	##             write('\n')
202	>
203	>
204
205	<	print "Used prescale column(s): "+str(PrescaleColumnString)
206	<	print "Lumisections: "+str(LumiRange)
205	>	def isSequential(t):
206	>	try:
207	>	if len(t)<2:
208	>	return True
209	>	except:
210	>	return True
211	>	for i,e in enumerate(t[1:]):
212	>	if not abs(e-t[i])==1:
213	>	return False
214	>	return True

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines