Plotting/Modules/Setup.C

#include <iostream>
#include <fstream>
#include <TCut.h>
#include <TColor.h>
#include <TStyle.h>

#ifndef SampleClassLoaded
#include "SampleClass.C"
#endif
#define SetupLoaded
#ifndef ResultLibraryClassLoaded
#include "ResultLibraryClass.C"
#endif


using namespace std;


namespace PlottingSetup {

  string directoryname="Results_With_4653ipb__Step8___AllInOne___PAPERMODE";
  
  bool RestrictToMassPeak=true; //if you want to switch between offpeak ("false") and onpeak ("true") analysis please use this switch; the masscut below will be adapted automatically when adding samples :-)
  
  float luminosity=4653.74;//p3523.18;//2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
//  float luminosity=3523.18;//2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
//  float luminosity=2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
  float lumiuncert=0.045;// to be indicated in [0,1] range, e.g. for 4% write 0.04

  string jzbvariabledata="jzb[1]+0.06*pt";
  string jzbvariablemc="jzb[1]+0.04*pt";
  float jzbHigh = 400.; // Range for JZB plots

  samplecollection allsamples("completesamplecollection");
  samplecollection signalsamples("signalsamplecollection");
  samplecollection systsamples("systematicssamplecollection");
  samplecollection scansample("scansamplecollection");
  samplecollection raresample("raresamplecollection");
  int data=1;
  int mc=0;
  int mcwithsignal=2;
  TCut passtrig("(passed_triggers||!is_data)");
  TCut cutmass("abs(mll-91.2)<20");
  TCut genMassCut("abs(genMll-91.2)<20");
  TCut openmasscut("mll>40"); // this is the mass cut used in the off peak analysis!
  TCut openGenmasscut("genMll>40");
  //TCut cutmass("mll>2");
  TCut basiccut("mll>2");//basically nothing.
  TCut basicqualitycut("(pfJetGoodNum>=2&&pfJetGoodID[0]!=0)&&(pfJetGoodNum>=2&&pfJetGoodID[1]!=0)");//don't use this for the "essential cut", because we want to plot nJets as well as mll in the inclusive case; we thus use it as an addition nJets cut.
  //TCut jetqualitycut("(pfJetGoodNum>=2&&pfJetGoodID[0])&&(pfJetGoodNum>=2&&pfJetGoodID[1])");//now part of the basiccut
  //TCut jetqualitycut("mll>0");
  
  TCut cutnJets("pfJetGoodNum>=3"&&basicqualitycut);
  TCut cutnJetsJESdown("pfJetGoodNum25>=3"&&basicqualitycut);
  TCut cutnJetsJESup("pfJetGoodNum35>=3"&&basicqualitycut);
  TCut cutOSOF("(id1!=id2)&&(ch1*ch2<0)");
  TCut cutOSSF("(id1==id2)&&(ch1*ch2<0)");
  TCut sidebandcut("(mll>55&&mll<70)||(mll>112&&mll<160)");

  // SUSY scan parameters
  float mglustart=25;float mgluend=1200;float mglustep=25;
  float mLSPstart=25;float mLSPend=1200;float mLSPstep=25;
  
  float m0start=20;  float m0end=2000;  float m0step=20;
  float m12start=20; float m12end=760;  float m12step=20;
  
  int ScanXzones=15; // number of zones in x for (mSUGRA) scans
  int ScanYzones=15; // number of zones in y for (mSUGRA) scans

  //scan types:
  int mSUGRA=1;
  int SMS=2;
  int GMSB=3;

  TCut essential(passtrig);//add here any cuts you ALWAYS want
  int dogaus=0;
  int doKM=1;
  int dogaus2sigma=2;
  int dogaus3sigma=3;
  int Kostasmethod=-99;
  
  float fitresultconstdata=0;//this is the result when fitting in the 0-30 GeV range
  float fitresultconstmc=0;//this is the result when fitting in the 0-30 GeV range
  
  int method=-1;//Fitting method
  
  //now some style issues:
  float DataMarkerSize=1.2;
  
  //here we save our number of predicted and observed events (with errors)
  vector<float> Nobs;
  vector<float> Npred;
  vector<float> Nprederr;
  
  //here we save our "flipped" number of predicted and observed events (with errors) -- this means that we consider JZB<-X as observed and construct the corresponding prediction
  bool alwaysflip=false;
  vector<float> flippedNobs;
  vector<float> flippedNpred;
  vector<float> flippedNprederr;
  
  int noJES=0;
  int JESdown=1;
  int JESup=2;
  
  //some refinement: nicer color gradient
  Double_t stops[5] = { 0.00, 0.34, 0.61, 0.84, 1.00 };
  Double_t red[5]   = { 0.00, 0.00, 0.87, 1.00, 0.51 };
  Double_t green[5] = { 0.00, 0.81, 1.00, 0.20, 0.00 };
  Double_t blue[5]  = { 0.51, 1.00, 0.12, 0.00, 0.00 };
  int fi=TColor::CreateGradientColorTable(5, stops, red, green,blue, 255);
  
  // LIMITS
  int nlimittoys=1000; // how many toys for setting limits
  string limitmethod="cls";//what method to use to set limits
  int limitpatience=15; // for how many minutes should the limit calculation (for one configuration!) be allowed to run before being aborted? this only has an effect when when running on the t3 batch; the value for CRAB is on the next line
  int limitpatienceCRAB=60;
  bool ConsiderSignalContaminationForLimits=true; //whether or not to consider signal contamination when computing limits (standard:true)
  int nuisancemodel=1;
  
  float JZBPeakPositionData=-999;
  float JZBPeakPositionMC=-999;
  float JZBPeakWidthData=-999;
  float JZBPeakWidthMC=-999;

  // two possible future systematics that ATM only take up CPU time in SUSY scans
  bool computeJZBefficiency=false;
  bool computeJZBresponse=false;

  bool requireZ=true;

  string ScanSampleDirectory="SMS_T5zz/"; // possibilities (atm) : SMS_T5zz/, SMS_T5zzl/, SMS_T5zzh/, GMSB/, mSUGRA/     note: this string needs to either contain "SMS", "GMSB", or "mSUGRA"

  ResultLibrary allresults;
}
Revision:	1.63
Committed:	Thu Jan 19 08:37:12 2012 UTC (13 years, 3 months ago) by buchmann
Content type:	text/plain
Branch:	MAIN
CVS Tags:	cbaf_4p7ifb
Changes since 1.62:	+2 -2 lines
Log Message:	Updated scan directory (so x is identifiable from directory name); updated plot directory name
#	Content
1	#include <iostream>
2	#include <fstream>
3	#include <TCut.h>
4	#include <TColor.h>
5	#include <TStyle.h>
6
7	#ifndef SampleClassLoaded
8	#include "SampleClass.C"
9	#endif
10	#define SetupLoaded
11	#ifndef ResultLibraryClassLoaded
12	#include "ResultLibraryClass.C"
13	#endif
14
15
16	using namespace std;
17
18
19	namespace PlottingSetup {
20
21	string directoryname="Results_With_4653ipb__Step8___AllInOne___PAPERMODE";
22
23	bool RestrictToMassPeak=true; //if you want to switch between offpeak ("false") and onpeak ("true") analysis please use this switch; the masscut below will be adapted automatically when adding samples :-)
24
25	float luminosity=4653.74;//p3523.18;//2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
26	// float luminosity=3523.18;//2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
27	// float luminosity=2096.0;//3172.73;//2096.0;//1936;//751.0;//486.0;//468.0//336.;//pb^{-1}
28	float lumiuncert=0.045;// to be indicated in [0,1] range, e.g. for 4% write 0.04
29
30	string jzbvariabledata="jzb[1]+0.06*pt";
31	string jzbvariablemc="jzb[1]+0.04*pt";
32	float jzbHigh = 400.; // Range for JZB plots
33
34	samplecollection allsamples("completesamplecollection");
35	samplecollection signalsamples("signalsamplecollection");
36	samplecollection systsamples("systematicssamplecollection");
37	samplecollection scansample("scansamplecollection");
38	samplecollection raresample("raresamplecollection");
39	int data=1;
40	int mc=0;
41	int mcwithsignal=2;
42	TCut passtrig("(passed_triggers\|\|!is_data)");
43	TCut cutmass("abs(mll-91.2)<20");
44	TCut genMassCut("abs(genMll-91.2)<20");
45	TCut openmasscut("mll>40"); // this is the mass cut used in the off peak analysis!
46	TCut openGenmasscut("genMll>40");
47	//TCut cutmass("mll>2");
48	TCut basiccut("mll>2");//basically nothing.
49	TCut basicqualitycut("(pfJetGoodNum>=2&&pfJetGoodID[0]!=0)&&(pfJetGoodNum>=2&&pfJetGoodID[1]!=0)");//don't use this for the "essential cut", because we want to plot nJets as well as mll in the inclusive case; we thus use it as an addition nJets cut.
50	//TCut jetqualitycut("(pfJetGoodNum>=2&&pfJetGoodID[0])&&(pfJetGoodNum>=2&&pfJetGoodID[1])");//now part of the basiccut
51	//TCut jetqualitycut("mll>0");
52
53	TCut cutnJets("pfJetGoodNum>=3"&&basicqualitycut);
54	TCut cutnJetsJESdown("pfJetGoodNum25>=3"&&basicqualitycut);
55	TCut cutnJetsJESup("pfJetGoodNum35>=3"&&basicqualitycut);
56	TCut cutOSOF("(id1!=id2)&&(ch1*ch2<0)");
57	TCut cutOSSF("(id1==id2)&&(ch1*ch2<0)");
58	TCut sidebandcut("(mll>55&&mll<70)\|\|(mll>112&&mll<160)");
59
60	// SUSY scan parameters
61	float mglustart=25;float mgluend=1200;float mglustep=25;
62	float mLSPstart=25;float mLSPend=1200;float mLSPstep=25;
63
64	float m0start=20; float m0end=2000; float m0step=20;
65	float m12start=20; float m12end=760; float m12step=20;
66
67	int ScanXzones=15; // number of zones in x for (mSUGRA) scans
68	int ScanYzones=15; // number of zones in y for (mSUGRA) scans
69
70	//scan types:
71	int mSUGRA=1;
72	int SMS=2;
73	int GMSB=3;
74
75	TCut essential(passtrig);//add here any cuts you ALWAYS want
76	int dogaus=0;
77	int doKM=1;
78	int dogaus2sigma=2;
79	int dogaus3sigma=3;
80	int Kostasmethod=-99;
81
82	float fitresultconstdata=0;//this is the result when fitting in the 0-30 GeV range
83	float fitresultconstmc=0;//this is the result when fitting in the 0-30 GeV range
84
85	int method=-1;//Fitting method
86
87	//now some style issues:
88	float DataMarkerSize=1.2;
89
90	//here we save our number of predicted and observed events (with errors)
91	vector<float> Nobs;
92	vector<float> Npred;
93	vector<float> Nprederr;
94
95	//here we save our "flipped" number of predicted and observed events (with errors) -- this means that we consider JZB<-X as observed and construct the corresponding prediction
96	bool alwaysflip=false;
97	vector<float> flippedNobs;
98	vector<float> flippedNpred;
99	vector<float> flippedNprederr;
100
101	int noJES=0;
102	int JESdown=1;
103	int JESup=2;
104
105	//some refinement: nicer color gradient
106	Double_t stops[5] = { 0.00, 0.34, 0.61, 0.84, 1.00 };
107	Double_t red[5] = { 0.00, 0.00, 0.87, 1.00, 0.51 };
108	Double_t green[5] = { 0.00, 0.81, 1.00, 0.20, 0.00 };
109	Double_t blue[5] = { 0.51, 1.00, 0.12, 0.00, 0.00 };
110	int fi=TColor::CreateGradientColorTable(5, stops, red, green,blue, 255);
111
112	// LIMITS
113	int nlimittoys=1000; // how many toys for setting limits
114	string limitmethod="cls";//what method to use to set limits
115	int limitpatience=15; // for how many minutes should the limit calculation (for one configuration!) be allowed to run before being aborted? this only has an effect when when running on the t3 batch; the value for CRAB is on the next line
116	int limitpatienceCRAB=60;
117	bool ConsiderSignalContaminationForLimits=true; //whether or not to consider signal contamination when computing limits (standard:true)
118	int nuisancemodel=1;
119
120	float JZBPeakPositionData=-999;
121	float JZBPeakPositionMC=-999;
122	float JZBPeakWidthData=-999;
123	float JZBPeakWidthMC=-999;
124
125	// two possible future systematics that ATM only take up CPU time in SUSY scans
126	bool computeJZBefficiency=false;
127	bool computeJZBresponse=false;
128
129	bool requireZ=true;
130
131	string ScanSampleDirectory="SMS_T5zz/"; // possibilities (atm) : SMS_T5zz/, SMS_T5zzl/, SMS_T5zzh/, GMSB/, mSUGRA/ note: this string needs to either contain "SMS", "GMSB", or "mSUGRA"
132
133	ResultLibrary allresults;
134	}